SDH-based MSTP network management technical specification - Part 3: EMS-NMS interface function
1 Scope
This part specifies the function requirements for EMS-NMS interface of the SDH-based MSTP transport network.
This part is applicable to the EMS-NMS interface of SDH-based MSTP, including MSTP management interface embedded with RPR.
This part does not include the contents of MSTP management interface embedded with MPLS for the time being.
This part is applicable to the management of WDM optical network and PDH system.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this part. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document is applicable to this part.
YD/T 852-1996 General design principles of telecommunications management network (TMN)
ITU-TG.805 Generic functional architecture of transport networks
ITU-TG.809 Functional architecture of connectionless layer networks
ITU-TG.8010 Architecture of Ethernet layer networks
ITU-TG.774 series Synchronous digital hierarchy (SDH) - Management information model for the network element
TMF 513 (2003) Multi-technology network management: Business agreement: NML-EML interface (Version 3.0)
TMF 608 (2003) Multi-technology network management: Information agreement: NML-EML interface (Version 3.0)
TMF 814 (2003) Multi-technology network management: Solution set document: NML-EML interface (Version 3.0)
TMF 814A (2003) Telecom management forum - Multi-technology network management: Implementation statement (IS) template and guidelines: NML-EML interface (Version 3.0)
YD/T 1238-2002 Technical requirements for SDH multi-service transport platform
YD/T 1345-2005 Technical requirements for SDH-based MSTP embedded with RPR
YD/T 1289.1-2003 Synchronous digital hierarchy (SDH) transport network management system technical specification - Part 1: Basic principle
YD/T 1289.4-2006 Synchronous digital hierarchy (SDH) transport network management system technical specification - Part 4: EMS-NMS interface function
3 Terms, definitions and abbreviations
3.1 Terms and definitions
For the purposes of this part, the following terms and definitions apply.
3.1.1 network management system
NMS
complying with YD/T 1289.1-2003 Synchronous digital hierarchy (SDH) transport network management system technical specification - Part 1: Basic principle
3.1.2 element management system
EMS
complying with YD/T 1289.1-2003 Synchronous digital hierarchy (SDH) transport network management system technical specification - Part 1: Basic principle
3.1.3 topological link
link between two physical termination points (or FTPs) managed by the same EMS, wherein, the two termination points are not necessarily located in adjacent network elements, and the topological link may represent the logical connection between the termination points (for example, the topological link may cross the network elements managed by different EMSs)
3.1.4 managed element
independent and complete equipment in optical transport network, such as SDH add-drop multiplexer, terminal multiplexer, SDH regenerator, etc.
3.1.5 cross connection
connection between two connection termination points in the same network element
3.1.6 subnetwork
subset of network that is functionally divided for the purpose of routing and management
3.1.7 SNC
transport entity that transports feature information within a subnetwork, which consists of termination points at the subnetwork boundary and supports transparent end-to-end transport within the subnetwork
3.1.8 flow domain, FD
topological component used for forwarding specific characteristic information
3.1.9 matrix flow domain, MFD
minimum flow domain that can no longer be divided. For Ethernet technology, one MFD corresponds to one IEE bridge
3.1.10 virtual bridge, VB
equivalent to bridge, corresponding to G.809 Matrix Flow Domain
3.1.11 encapsulation layer link, ELL
link with encapsulation layer rate between Matrix Flow Domains
3.1.12 matrix flow domain fragment, Matrix FDFr
FDFr in MFD is MFDFr
3.1.13 flow domain fragment, FDFr
connectivity between flow points in a flow domain
3.2 Abbreviations
For the purposes of this part, the following abbreviations apply.
CTP Connection Termination Point
CIR Confirmed Information Rate
CoS Class of Service
CBS Committed Burst Size
DCN Data Communication Network
EMS Element Management System
EIR Excess Information Rate
EPL Ethernet Private Line
EVPL Ethernet Virtual Private Line
EPLAN Ethernet Private LAN
EVPLAN Ethernet Virtual Private LAN
FCS Frame Check Sequence
FTP Floating Termination Point
GFP Generic Framing Procedure
LAPS Link Access Procedure-SDH
LCAS Link Capacity Adjustment Scheme
MAC Media Access Control
MSTP Multi-Service Transport Platform
MSTP Multiple Spanning Tree Protocol
MBS Maximum Burst Size
NMS Network Management System
PTP Physical Termination Point
PIR Peak Information Rate
PPP Point-to-Point Protocol
PVID Port VLAN Identifier
QoS Quality of Service
RSTP Rapid Spanning Tree Protocol
RPR Resilient Packet Ring
SDH Synchronous Digital Hierarchy
SNCP Sub-Network Connection Protection
STP Spanning Tree Protocol
TMN Telecommunications Management Network
VID VLAN Identifier
VLAN Virtual Local Area Network
VB Virtual Bridge
4 Interface function requirements
SDH-based MSTP management system completes the exchange of standard management information and security management, configuration management, fault management and performance management. The network management levels include: SDH, ATM, Ethernet, RPR and MPLS. NEs communicate through ECC protocol stack or TCP/IP protocol stack. The overall structure of management system is shown in Figure 1.
Foreword i
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
3.1 Terms and definitions
3.2 Abbreviations
4 Interface function requirements
4.1 High-level use cases
4.2 Roles
4.3 Public management function
4.4 Common management function
4.5 Element EMS-NMS interface management functions
4.6 Subnetwork EMS-NMS interface management functions
系统(EMS)─网络管理系统(NMS)接口功能
1 范围
本部分规定了基于SDH的MSTP传送网EMS-NMS之间的接口功能要求。
本部分适用于基于SDH的MSTP中EMS与NMS之间的接口,包括内嵌RPR的MSTP管理接口。
本部分暂不包含内嵌MPLS的MSTP管理接口部分的内容。
本部分不适用于对WDM光网和PDH系统的管理。
2 规范性引用文件
下列文件中的条款通过本标准的引用而成为本部分的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本部分。然而,鼓励根据本部分达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本部分。.
YD/T 852-1996 电信管理网总体原则
ITU-TG.805 传输网通用功能框架
ITU-TG.809 无连接层网络功能框架
ITU-TG.8010 以太网层网络框架
ITU-TG.774系列 SDH网元管理信息模型
TMF 513(2003) 多技术网络管理事务协定NML-EM接口版本3.0
TMF 608(2003) 多技术网络管理信息协定NML-EML接口版本3.0
TMF 814(2003) 多技术网络管理解决方案集NML-EML接口版本3.0
TMF 814A(2003) 电信管理论坛多技术网络管理实现声明模板和指南NML-EML接口版本3.0
YD/T 1238-2002 基于SDH的多业务传送节点技术要求
YDT 1345-2005 基于SDH的多业务传送节点(SDH)技术要求──内嵌弹性分组环(RPR)
功能部分
YD/T 1289.1-2003 同步数字体系(SDH)传送网网络管理技术要求 第1部分:基本原则
YDT 1289.4-2006 同步数字体系(SDH)传送网网络管理技术要求 第4部分:网元管理系统(EMS)──网络管理系统(NMS)接口功能
3 术语、定义和缩略语
3.1 术语和定义
下列术语和定义适用于本部分。
3.1.1 网络管理系统 Network Management System
NMS。
符合YD/T1289.1-2003《同步数字体系(SDH)传送网网络管理技术要求 第1部分:基本原则》中的定义。
3.1.2 网元管理系统 Element Management System
EMS。
符合YD/T 1289.1-2003《同步数字体系(SDH)传送网网络管理技术要求 第1部分:基本原则》中的定义。
3.1.3 拓扑链路 Topological Link
指两个由同一EMS管理的物理终端点(或浮动终端点FTP)之间的链路,这两个终端点并不一定处于相邻的网元,拓扑链路可表示终端点之间的逻辑连接(如拓扑链路可能跨越由另外不同的EMS管理的网元)。
3.1.4 管理单元 Managed Element
指光传送网中一个功能独立、完整的设备实体,如SDH分插复用器、终端复用器、SDH再生器等。
3.1.5 交叉连接 CrossConnection
指两个同一网元内的连接终端点之间的连接。
3.1.6 子网 Subnetwork
指为了进行选路由和管理的目的,对网络进行功能分割的子集。
3.1.7 子网连接 SNC
指在子网内传送特征信息的传送实体,由子网边界的终端点组成,支持子网内的透明的端到端传送。
3.1.8 流域FD
Flow Domain,表示用于实现转发特定特性信息的拓扑组件。
3.1.9 矩阵流域 MFD
Matrix Flow Domain,表示最小的无法再继续分解的流域,对于以太网技术,一个MFD对应一个IEE的桥。
3.1.10 虚拟网桥 VB
Virtual Bridge,等同于网桥,对应于G.809的Matrix Flow Domain。
3.1.11 封装层链路 ELL
Encapsulation Layer Link,表示Matix Flow Domain之间具有封装层速率的链路。
3.1.12 矩阵流域片段 Matrix FDFr
Matix Flow Domain Fragment,当流域为MFD,其中的FDFr称为MFDFr。
3.1.13 流域片段 FDFr
Flow Domain Fragment,表示流域的流点之间的连通性。
3.2 缩略语
下列缩略语适用于本部分。
CTP Connection Termination Point 连接终端点
CIR Confirmed Information Rate 承诺信息速率.
CoS Class of Service 业务分类
CBS Committed Burst Size 承诺突发容量
DCN Data Communication Network 数据通信网
EMS Element Management System 网元管理系统
EIR Excess Information Rate 多余信息速率
EPL Ethernet Private Line 以太网专线
EVPL Ethernet Virtual Private Line 以太网虚拟专线
EPLAN Ethernet Private LAN 以太网专用局域网
EVPLAN Ethernet Virtual Private LAN 虚拟以太网专用局域网
FCS Frame Check Sequence 帧校验序列
FTP Floating Termination Point 浮动终端点
GFP Generic Framing Procedure 通用成帧规程
LAPS Link Access Procedure-SDH 链路接入协议─SDH
LCAS Link Capacity Adjustment Scheme 链路容量调整方案
MAC Media Access Control 介质访问控制
MSTP Multi-Service Transport Platform 多业务传送节点
MSTP Multiple Spanning Tree Protocol 多生成树协议
MBS Maximum Burst Size 最大突发容量
NMS Network Management System 网络管理系统
PTP Physical Termination Point 物理终端点
PIR Peak Information Rate 峰值信息速率
PPP Point-to-Point Protocol 点对点协议
PVID Port VLAN ldentifier 端口VLAN标识符
QoS Quality of Service 服务质量
RSTP Rapid Spanning Tree Protocol 快速生成树协议
RPR Resilient Packet Ring 弹性分组环
SDH Synchronous Digital Hierarchy 同步数字体系
SNCP Sub-Network Connection Protection 子网连接保护
STP Spanning Tree Protocol 生成树协议
TMN Telecommunications Management Network 电信管理网
VID VLAN ldentifier VLAN标识符
VLAN Virtual Local Area Network 虚拟局域网
VB Virtual Bridge 虚拟网桥
4 接口功能要求
基于SDH的MSTP管理系统完成标准管理信息的交换及安全管理、配置管理、故障管理和性能管理。管理(的网络层次包括:SDH,ATM,以太网,RPR,MPLS。网元间通过ECC协议栈或TCP/TP协议栈通信。管理系统的总体结构如图1所示。
Q3/CORBAIXML其他
MSTP网管系统
故障管理SDH管理
配置管理ATM管理
性能管理以太网管理
安全管理RPR管理MPLS管理
MSTP网元
BCC协议栈或TCP/IP协议栈
MSTP网元
图1 基于SDH的MSTP管理系统总体结构
图1定义了基于SDH的MSTP管理系统的总体结构。MSTP网管系统的北向接口可以是Q3、CORBA、XML或其他,本标准不作限制。
4.1 高层用例
基于SDH的MSTP网络管理系统NMS与网元管理系统EMS之间接口功能的高层用例包括公共管理功能、配置管理功能、性能管理功能、故障管理功能和安全管理功能,如图2所示。
MSTP网络管理接口功能
配置管理功能
性能管理功能
故障管理功能
安全管理功能
公共管理功能集
图2高层用例
在图1中,<>表示NMS与EMS间接口功能用例可进一步分解为4个用例:配置管理功能集、性能管理功能集、故障管理功能集和安全管理功能集。<>表示配置管理功能集、性能管理功能集、安全管理功能集或故障管理功能集用例中的功能,可能需要公共管理功能集中的功能作为支持。
4.2 角色
EMS。.
NMS。
4.3 公共管理功能
公共管理功能应符合YD/T 1289.4-2006《同步数字体系(SDH)传送网网络管理技术要求 第4部分:网元管理系统(EMS)──网络管理系统(NMS)接口功能》第4.3节的要求。
4.4 通用管理功能
通用管理功能应符合YD/T 1289.4-2006《同步数字体系(SDH)传送网网络管理技术要求 第4部分:网元管理系统(EMS)──网络管理系统(NMS)接口功能》第4.4节的要求。
MSTP新增的告警数据和性能数据,应符合下列标准相应章节的要求。
YD/T 1238-2002《基于SDH的多业务传送节点技术要求》第10.1.1.2节、第10.1.1.3节、第10.2.11节和第10.2.1.2节。
YD/T 1345-2005《基于SDH的多业务传送节点(sDH)技术要求──内嵌弹性分组环(RPR)功能部分》第10.2.1.3节、第10.3.2节。
4.5 网元级EMS与NMS接口管理功能
4.5.1 配置管理功能
4.5.1.1 终端点配置管理
终端点配置管理应符合YD/T 1289.4-2006《同步数字体系(SDH)传送网网络管理技术要 第4部分:网元管理系统(EMS)──网络管理系统(NMS)接口功能》第4.5.1.1节的要求。
4.5.1.2 交叉连接配置管理
交叉连接配置管理应符合YD/T 1289.4-2006《同步数字体系(SDH)传送网网络管理技术要求 第4部分:网元管理系统(BMS)──网络管理系统(NMS)接口功能》第4.5.1.2节的要求。
4.5.1.3 以太网端口管理
4.5.1.3.1 设置以太网单板UNI属性(可选)
EMS应允许NMS设置以太网单板UNI属性,请求中包括以下参数:
─ UNI标识符;
─ UNI属性(包括双工模式[全双工/半双工]、自协商模式[使能/禁止]、最大数据包长度[可选]、使能状态、PVID、Tag属性等参数)。
4.5.1.3.2 查询以太网单板UNI属性
EMS应允许NMS查询以太网单板UNI的属性,包括:
─ UNI标识符;
─ 用户标签;
─ UNI属性(包括双工模式、自协商模式、最大数据包长度[可选]、使能状态、PVD、Tag属性、层速率等参数)。
4.5.1.3.3 以太网端口创建通知上报(可选)
当EMS侧新增端口时,需要主动向NMS.上报端口创建通知,通知中包含新增端口的信息:
─ 端口标识符;
─ 端口用户标签;
─ 端口属性(包括双工模式、自协商模式、最大数据包长度、使能状态、PVID、Tag属性、层速率等参数);
─ 端口类型(UNI或者NNI)。
4.5.1.3.4 以太网端口删除通知上报(可选)
当EMS侧删除端口时,需要主动向NMS上报端口删除通知,通知中包含删除端口的标识。
4.5.1.3.5 设置以太网单板NNI属性{可选)
EMS应允许NMS设置以太网单板NN的属性,请求中包括以下参数: