1 Scope
This standard specifies the terms and definitions, technical requirements, sampling and specimen preparation, determination method, inspection rules, packaging, marking, transportation and storage of inner liner for cigarette.
This standard is applicable to inner liner for cigarette.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 451.1 Paper and Board - Determination of Size and Deviation
GB/T 5009.78-2003 Method for Analysis of Hygienic Standard of Papers for Food Packaging
GB/T 7974 Paper, Board and Pulps - Measurement of Diffuse Blue Reflectance Factor - D65 Brightness (Diff/Geometry, Outdoor Daylight Conditions)
GB/T 10006-1988 Plastics; Film and Sheeting - Determination of the Coefficients of Friction
GB/T 10342-2002 Paper - Package and Mark
GB/T 10739 Paper, Board and Pulps - Standard Atmosphere for Conditioning and Testing
GB/T 12914-2008 Paper and Board - Determination of Tensile Properties
YC/T 207 Determination of Solvent Residuals on Papers for Cigarette - Headspace-Gas Chromatography/Mass Spectrometry
3 Terms and Definitions
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Technical Requirements
5 Sampling and Specimen Preparation
6 Determination Method
7 Inspection Rules
8 Packaging, Marking, Transportation and Storage
Annex A (Normative) Determination Method of Sliding Friction Coefficient
Annex B (Normative) Test Method of Interlayer Adhesion
