Steel wire ropes for aeronautical use
1 Scope
This standard specifies the terms and definitions, classification, dimension, appearance, weight, technical requirements, test methods, inspection rules, packaging, marking and quality certificate for steel wire ropes for aeronautical use.
This standard is applicable to steel wire ropes for aeronautical use, as well as steel wire ropes for important machinery and instruments.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition applies.
GB/T 228 Metallic materials - Tensile testing at ambient temperature (GB/T 228-2002, ISO 6892: 1998, eqv)
GB/T 238 Metallic materials - Wire - Reverse bend test
GB/T 239 Metallic materials wire torsion test (GB/T 239-1999, ISO 7800: 1984, ISO 9649: 1990, eqv)
GB/T 699 Quality carbon structure steels
GB/T 2104 Steel wire ropes - Packing, marking and certificate - General requirements
GB/T 2973 Zinc coated steel wire test method for gravimetric determination of zinc coating
GB/T 8170 Rules for rounding off of numerical values
GB/T 8358 Method of breaking tensile test for steel wire ropes (GB/T 8358-1987, ISO 3108;1974. eqv)
GB/T 8706 Steel wire ropes; Terminology (GB/T 8706-1988, ISO 2532:1974, eqv)
GB/T 8707 Steel wire ropes - Standard designations (GB/T 8707-1988, ISO 3578; 1980, idt)
GB/T 12347 Steel wire ropes - Bending fatigue testing
YB/T 081 Rule for rounding off of numberical values and judgement of testing values for technical standards of metallurgy
SH/T 0387 Rope surface fat
3 Terms and definitions
For the purposes of this standard, the terms and definitions given in GB/T 8706 apply.
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Ordering information
6 Dimensions, shapes and weights
7 Technical requirements
8 Test methods
9 Inspection rules
10 Packaging, marking and quality certificate
