Specifications for mould plates of CC
1 Scope
This standard specifies the materials, machining and electroplating technical requirements, test methods, inspection rules and packaging requirements for mould plates of CC.
This standard is applicable to the manufacture of copper-chromium-zirconium, copper-silver and copper-nickel-beryllium plates for mould of CC and chromium, nickel, ferro-nickel, nickel-cobalt and cobalt-nickel electroplated coatings.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.
GB/T 228 Metallic materials - Tensile testing at ambient temperature (eqv ISO 6892:1998)
GB/T 231.1 Metallic materials - Brinell hardness test - Part 1: Test method (eqv ISO 6506-1:1999)
GB/T 1804-2000 General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications (eqv ISO 2768-1: 1989)
GB/T 2040 Copper and copper alloy sheet
GB/T 3651 Measuring method for thermal conductivity of metal at high temperature
GB/T 4339 Test methods for thermal expansion characteristic parameters of metallic materials (neq ASTM E 228:1995)
GB/T 4955 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution (idt ISO 2177:1985)
GB/T 4956 Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (eqv ISO 2178:1982)
GB/T 5121.1~5121.23 Methods for chemical analysis of copper and copper alloys
GB/T 5270 Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion (eqv ISO 2819:1980)
GB/T 8888 Wrought heavy non-ferrous metal products - Packing, marking, transporting and storing
GB/T 9790 Metallic and related coatings - Vickers and knoop microhardness tests (neq ISO 4516:1980)
GB/T 10610 Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (eqv ISO 4288:1996)
GB/T 11379 Metallic coatings - Electroplated coatings of chromium for engineering purposes (neq ISO 6158:1984)
GB/T 12332 Metallic coatings - Electroplated coatings of nickel for engineering purposes (eqv ISO 4526:1984)
GB/T 12611 Technical requirements of quality control for metal parts to be coated
GB/T 17394 Metallic materials - Leeb hardness test
JB/T 10061 Commonly used specification A-mode ultrasonic flaw detector using pulse echo technique (eqv ASTM E 750:1980)
3 Technical requirements
3.1 Chemical composition
Foreword i
1 Scope
2 Normative references
3 Technical requirements
4 Test methods
5 Inspection rules
6 Packaging, marking, transportation, storage and quality certificate
7 Others
Annex A (Normative) Requirements for ultrasonic flaw detection of mould plates
Annex B (Normative) Requirements for ultrasonic flaw detection of electroplated coating on mould plate
