1. Scope
This standard specifies the test methods for the common interface of conditional access (CA) system of digital television receiver (hereinafter referred to as DTV-CI).
This standard is applicable to digital television receiver adopted with CA separation method.
2. Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. However, all parties coming to a protocol according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies.
GB/T 7676.1-1998 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories - Part 1: Definition and General Requirements Common to All Parts (idt IEC 60051-1:1984)
GB/T 7676.2-1998 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories - Part 2: Special Requirements for Ammeters and Voltmeters (idt IEC 60051-2:1984)
SJ-T 11336-2006 Interface Specification for Conditional Access of Digital Television Receiver - Part 1-1: DT-CI Technical Specification
3. Term and Definitions
For the purpose of this standard, terms and definitions specified in SJ 11336-2006 apply.
4. Abbreviations
For the purpose of this standard, the following abbreviations apply.
Foreword I
Introduction II
1. Scope
2. Normative References
3. Term and Definitions
4. Abbreviations
5. DTV-CI Function
5.1 General
5.2 Transport Stream Interface
5.3 Command Interface
6. Test Instruments and Measuring Conditions
7. Test for DTV-CI Card
7.1 Interface Physical Test
7.2 Voltage Test
7.3 Current Test
7.4 Initialization Test
7.5 Multilayer Protocol Test
7.6 CA Resource Test
7.7 Date-time Resource Test
7.8 MMI Resource Test
7.9 Hot Plug Signal Test
7.10 TS Test
8. Summary of DTV-CI Card Test List
8.1 Introduction
8.2 Test Items
9. Host Test in Accordance with DTV-CI Specification
9.1 Physical Test for Host Interface
9.2 Power Supply Test
9.3 Initialization Test
9.4 Multilayer Protocol Test for Command Interface
9.5 CA Resource Test
9.6 Date-time Resource Test
9.7 MMI Resource Test
9.8 Hot Plug Signal Test
9.9 TS Test
10. Interactive Test
10.1 Test Purpose
10.2 Test Device
10.3 Card Interchangeability Test during Interactive Test
10.4 Host Interchangeability Test during Interactive Test
11. Conformance Test List for CI Host with CA Separation
11.1 Introduction
11.2 Test Item
Appendix A (Normative) Description for Test Code Stream
A.1 Test Code Stream 1
A.2 Test Code Stream 2
