1 Scope
1.1 This standard specifies the method to use glassware to determine foaming tendencies of engine coolants at uniform temperature controlled in laboratory and under airing conditions.
1.2 This standard is related to some dangerous materials, operation and equipment; however, suggestions for all the relevant safety problems are not proposed; therefore, suitable safely and protective measures shall be established before the users use standard and applicability management system shall be determined.
2 Normative References
The following standard contains articles which, through reference in this text, constitute provisions of this standard. Unless there are definite additional provisions in the standard, the following normative references shall be current and effective.
1 Scope
2 Normative References
3 Terms
4 Method Summary
5 Significance and Purpose
6 Instrument
7 Reagent and Material
8 Test Solution
9 Test Conditions
10 Test Procedures
11 Report
Appendix A (Normative ) Thermometer Specification
