1 Subject Content and Application Scope
This standard specifies the technical specifications for mineral oil type bearing oil.
The products in this standard include two types: L-FC and L-FD. L-FC is the antioxygenic and anti-rust oil and L-FD is the antioxygenic, anti-rust and abrasion proof oil.
The products in this standard are applicable to industrial machinery and equipment such as spindle, bearing, hydraulic system, gear, turbine, etc.; L-FC may also be applicable to relevant clutch.
2 Normative References
GB/T 260 Determination of Water Content in Petroleum Products
GB/T 261 Petroleum Products; Determination of Flash Point; Closed Cup Method
GB/T 265 Petroleum Products - Determination of Kinematic Viscosity and Calculation of Dynamic Viscosity
GB/T 510 Petroleum Products; Determination of Solidification Point
GB/T 511 Petroleum Products and Additives-Determination of Mechanical Impurities-Gravimetric Method
GB/T 2433 Petroleum Products - Lubricating Oils and Additives - Determination of Sulphated Ash
GB/T 2541 Petroleum Products; Computation Table for Viscosity Index
GB/T 3141 Industrial Liquid Lubricants-ISO Viscosity Classification
GB/T 3142 Lubricants; Determination of Load Carrying Capacity (Four Balls Method)
GB/T 3535 Petroleum Products-Determination of Pour Point
GB/T 3536 Petroleum Products - Determination of Flash and Fire Points-Cleveland Open Cup Method
GB/T 4756 Petroleum Liquids - Manual Sampling
GB/T 4945 Standard Test Method for Acid and Base Number of Petroleum Products and Lubricants by-Colour-indicator Titration
GB/T 5096 Petroleum Products-Corrosiveness to Copper-Copper Strip Test
GB/T 6540 Petroleum Products; Determination of Colour
GB/T 7305 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
1 Subject Content and Application Scope
2 Normative References
3 Technical Contents
4 Marking, Packaging, Transport and Storage
5 Sampling
Additional Explanations
