1 Scope
This standard specifies the requirements, inspection method, inspection rules, marking, packaging, transportation and storage for fur and leather hats.
This standard is applicable to the procurement and acceptance for fur and leather hats.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 250 Textiles—Tests for colour fastness—Grey scale for assessing change in colour
GB 18401 National general safety technical code for textile products
GB 20400 Leather and fur—Limit of harmful matter
FZ / T 80008 Terms of woven caps
FZ / T 80010 Clothes-survey method for human body head girth and code of specification for cap
QB / T 1261 Terms of fur industry
QB/T 2725 Leather—Determination of odour
3 Terms and definitions
For the purposes of this document, the terms and definitions given in QB/T 1261 and FZ/T 80008 apply.
4 Requirements
4.1 Instructions for use
The finished product shall be indicated with Chinese product name, executive standard, size code, material (fabric, lining), manufacturer name and address, etc. The method of marking the size code of finished product and the location and maintenance method of the label shall meet the requirements of FZ/T 80010.
4.2 Finished product specification
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test methods
6 Inspection rules
7 Marking, packaging, transportation and storage
Annex A (Informative) List of related standards for fur and leather raw materials of caps
