General specification for telemetry products on missiles (rockets)
1 Subject and scope of application
This standard specifies the technical requirements, test methods, inspection rules as well as marking, packaging, transport and storage of telemetry products on missiles (rockets) in development, production and use phases.
This standard is applicable to the design and production of telemetry products on missiles (rockets), and serves as the fundamental basis for formulating telemetry product specifications, technical documents and acceptance conditions.
2 Normative references
GJB 21.1A Telemetry standards - The radio channel
GJB 21.2A Telemetry standards - Format of multiplex
GJB 21.3A Telemetry standards - Magnetic tape recorder and reproducer standards
GJB 21.4A Telemetry standards - Instrumentation magnetic tapes
GJB 383 Test methods for telemetry systems and subsystems
GJB 727 Terminology of telemetry system
GJB 899 Reliability testing for qualification and production acceptance
GJB 1032 Environmental stress screening process for electronic products
QJ 19 Specification for preparation of product certificates
QJ 165 General specifications for installation of aerospace electronic and electrical products
QJ 201 Specification for printed circuit board
QJ 548 General technical requirements for part manufacture and mechanical assembling of electronics
QJ 603 Parts and components for assembly of electronic products - Technical requirements for cable manufacturing
QJ 815.1 Product road transportation - Simulation test requirements and methods
QJ 815.2 Product road transportation - Accelerated simulation test requirements and methods
QJ 908 Burn-in test of electronic products
QJ 931 Specifications for control of superfluous objects in electronic products
QJ 1184 Environment code for coastal defense missile
QJ 1239 Environmental test conditions and methods for electronic equipment
QJ 1539 Electromagnetic compatibility requirements and measurement methods of aerospace telemetry system
QJ 2145 Management regulations on quality reliability of electronic parts and components
JTJ 01 Technical standard of highway engineering
3 Terms
For the purposes of this standard, the terms established in GJB 727 apply.
4 Technical requirements
4.1 Basic requirements
4.1.1 Raw materials
4.1.1.1 The raw materials used for the product shall comply with the relevant existing standards and product technical conditions.
4.1.1.2 The newly developed materials can only be selected for use after technical appraisal.
4.1.1.3 The raw materials used for the product shall be strictly reinspected, and can only be used after passing the resinpection.
4.1.2 Electronic parts and components
4.1.2.1 Electronic parts and components, which shall be provided with certificate of conformity, shall be purchased in strict accordance with the requirements for series, varieties, quality grades and manufacturer sites specified in the preferred directory as per product model.
1 Subject and scope of application
2 Normative references
3 Terms
4 Technical requirements
5 Test methods
6 Inspection rules
7 Marking, packaging, transport and storage
Additional explanation:
