Safety assurance requirements for aerospace products
1 Scope
1.1 Subject content
This standard specifies the general requirements, work items and implementation requirements for safety assurance of aerospace products.
1.2 Application scope
This standard is applicable to various stages of spacecrafts and carrier rockets (including ground equipment) such as feasibility demonstration, scheme, engineering development (prototype, test prototype or flight model) and use, and may be referred to by other aerospace products.
1.3 Application guide
1.3.1 When preparing the product safety work plan according to the requirements of this standard, the work items specified in this standard shall be tailored according to the national and aerospace safety regulations and contract requirements, as well as product types, technical risks, use requirements and other constraints, and the necessary work items shall be determined to achieve the specified safety objectives of the product in the most economical and effective way.
1.3.2 In order to adapt to the characteristics and safety assurance requirements of the product, the contents and implementation requirements of selected work items shall also be tailored, that is, the contents and requirements that are not applicable and necessary to the product shall be deleted, the technical requirements not included in this standard shall be revised or supplemented, and the problems of duplication and inconsistency with other technical requirements shall be coordinated.
1.3.3 For general guidance on tailoring and applying the work items given in this standard and their contents and requirements, see Annex A (Informative), Table A1 "Application table of system safety work items".
2 Normative references
GJB 768A-97 Guide to fault tree analysis
GJB 1391-92 Procedure for failure mode, effects and criticality analysis
GJB/Z 99-97 Engineering handbook for system safety
GJB/Z 102-97 Software reliability and safety design criteria
QJ 2145A-98 Assurance requirements for aerospace electronic, electrical and electromechanical devices
QJ 2171A-98 Assurance requirements for aerospace product
QJ 2932-97 Guide for system safety review of spacecrafts and missile weapons
3 Definitions
3.1 Terms
3.1.1 mishap
an accident or a series of accidents that cause casualties, occupational diseases, equipment damage, property loss or environmental hazards
3.1.2 hazard
necessary conditions for the occurrence of an accident
3.1.3 hazard analysis
systematic qualitative analysis of product design or use characteristics in order to identify and evaluate:
——hazards, and hazardous conditions with potential hazard;
——possible related hazardous events;
——criticality of the consequences of these hazardous events
3.1.4 hazard probability
sum of the probability of occurrence of all events causing a certain hazard
3.1.5 hazard severity
an estimate of the maximum severity of an accident that may be caused by a certain hazard
1 Scope
1.1 Subject content
1.2 Application scope
1.3 Application guide
2 Normative references
3 Definitions
3.1 Terms
4 General requirements
4.1 Safety work objectives and requirements
4.2 Organization, responsibility and authority of system safety work
4.3 Priorities for handling identified hazards
4.4 Assessment and management of safety risks
4.5 Safety conformity confirmation
4.6 Mishap reporting, investigation and handling
5 Detailed requirements (work items and their requirements)
5.1 System safety work plan
5.2 Coordination and management of subcontractors
5.3 System safety work review
5.4 Hazard tracking and risk management
5.5 Safety training and certificate
5.6 System safety design
5.7 Preliminary hazard list and preliminary hazard analysis
5.8 Subsystem hazard analysis and system hazard analysis
5.9 Operating & support hazard analysis
5.10 Safety assurance of test
5.11 Safety review of engineering change and deviation or out-of-tolerance concession applications
5.12 Safety verification
5.13 Safety assessment
Annex A Application guide of safety assurance requirements for aerospace products (Informative)
Annex B System safety design requirements for carrier rockets and spacecrafts (Informative)
