1 Scope
This part proposes requirements for general framework, service and logical nodes of communication protocol between power quality monitoring terminal and master station.
It is applicable to data transmission between power quality monitoring terminal and master station.
2 Normative References
The following documents are indispensible for the application of this document. For dated reference, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.
DL/Z 860.2-2006 Communication Networks and Systems in Substations – Part 2: Glossary (IEC 61850-2: 2003, IDT)
DL/T 860.5-2006 Communication Networks and Systems in Substations – Part 5: Communication Requirements for Functions and Device Models (IEC 61850-5: 2003, IDT)
DL/T 860.72-2004 Communication Networks and Systems in Substations – Part 7-2: Basic Communication Structure for Substation and Feeder Equipment – Abstract Communication Service Interfaces (ACSI) (IEC 61850-7-2: 2003, IDT)
Q/GDW 650.1-2014 Technical Specification of Power Quality Monitoring – Part 2: Power Quality Monitoring Master Station
Q/GDW 650.2-2014 Technical Specification of Power Quality Monitoring – Part 2: Power Quality Monitoring Device
3 Terms and Definitions
For the purpose of this document, the terms and definitions defined in DL/Z 860.2-2006, DL/T 860.5-2006, DL/T 860.72-2004, Q/GDW 650.1-2014 and Q/GDW 650.2-2014 apply.
4 Symbols, Codes and Abbreviations
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Symbols, Codes and Abbreviations
5 General Framework of Communication Protocol
5.1 Communication Architecture
5.2 General Modeling Principle
5.3 Modeling
6 Service
6.1 Associated Services
6.2 Data Read-Write Service
6.3 Dataset Service
6.4 Report Service
6.5 Setting Value Service
6.6 File Transfer Service
6.7 Log Service
6.8 Timing Service
6.9 Service Consistency
Appendix A (Normative) Logical Node
