1 Scope
This standard specifies requirements, test methods, inspection rules, marking, packaging, transport and storage of cleaner for kitchen stains & grease.
This standard is applicable to liquid detergent products which are prepared with various surface active agents, additives and solvents for the purpose of cleaning and decontamination of various hard surfaces in the kitchen.
This standard is not applicable to solid cleaner products for kitchen stains & grease.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 6368 Surface Active Agents - Determination of pH of Aqueous Solution - Potentiometric Method
GB/T 6682 Water for Analytical Laboratory Use - Specification and Test Methods
GB/T 7378 Surface Active Agents - Determination of Alkalinity - Titrimetric Method
GB/T 13173-2008 Surface Active Agents - Detergents - Testing Methods
GB/T 26396-2011 Technical Specification for Safety of Soaps and Detergents
QB/T 2117-1995 General Water-based Metal Cleanser
QB/T 2951 Inspecting Rules for Detergent Products
QB/T 2952 Requirements for Detergent Marks and Packaging
JJF 1070 Rules of Metrological Testing for Net Quantity of Products in Prepackages with Fixed Content
AQSIQ Decree [2005] No.75 Measures for the Metrological Supervision and Administration of Quantitatively Packed Commodities
Foreword i
1 Scope
2 Normative References
3 Requirements
4 Test Methods
5 Inspection Rules
6 Marking, Packaging, Transport and Storage
Annex A (Normative) Testing of Detergency
Annex B (Informative) Grubbs Method
