1 Scope
This standard specifies terms and definitions, requirements, test methods, inspection rules, marking, packaging, transport and storage all regarding wooden cabinet products.
This standard is applicable to wooden cabinet products, inapplicable to wooden cabinets categorized in kitchen furniture and bathroom furniture, nor the products not with cabinet-relative functions in the multi-function combine cabinet.
2 Normative References
The following referenced documents are indispensable for the application of this standard. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 191 Packaging - Pictorial Marking for Handling of Goods
GB/T 1931 Determination of Wood Moisture Content
GB/T 2828.1-2003 Sampling Procedures for Inspection by Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection
GB/T 3324-2008 Wooden furniture - General Technical Requirments
GB/T 4893.1 Furniture - Assessment of Surface Resistance to Cold Liquids
GB/T 4893.2 Furniture - Assessment of Surface Resistance to Wet Heat
GB/T 4893.3 Furniture - Assessment of Surface Resistance to Dry Heat
GB/T 4893.4 Furniture - Assessment of Adhesion of Surface Coatings - Cross Cut
GB/T 4893.7 Furniture - Assessment of Surface Resistance to Alteration of Heat and Cold
GB/T 4893.8 Furniture - Assessment of Wearability of Surface Coatings
GB/T 4893.9 Furniture - Test for Surfaces - Assessment of Resistance to Impact
GB 5296.6 Instructions for Use of Products of Consumer Interest - Part 6: Furniture
GB/T 10357.4-1989 Test of Mechanical Properties of Furniture - Stability`of Storage Units
GB/T 10357.5 Test of Mechanical Properties of Furniture - Strength and Dutability of Storage Units
GB 15763.2-2005 Safety Glazing Materials in Building - Part 2: Tempered Glass
GB/T 17657-1999 Test Methods of Evaluating the Properties of Wood-based Panels and Surface Decorated Wood-based Panels
GB 18584 Indoor Decorating and Refurbishing Materials - Limit of Harmful Substances of Wood Based Furniture
QB/T 3826 Corrosion-resistant Testing Method of the Metal Deposits and Conversion Coatings for the Light Industrial Products - Neutral Salt Spraying Test (NSS)
3 Terms and Definitions
For the purpose of this standard, terms and definitions demarcated in GB/T 3324-2008 and GB/T 10357.5 and those listed below apply.
3.1
Wooden cabinet
Cabinet mainly made of wood and wood-based panel.
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Requirements
5 Test Methods
6 Inspection Rules
7 Marking, Packaging, Transport and Storage
Appendix A (Normative) Annual Average Equilibrium Moisture Content of Woods in Different Regions in China
