1 Scope
This standard specifies the terms and definitions, classification, requirements, test methods, inspection rules as well as marking, packaging, transportation and storage for civil ornamental mirror.
This standard is applicable to the civil ornamental mirrors with glass as substrate, plated with metal film and painted with protective paint or with structural fittings after processing.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.
GB/T 2828.1-2003 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (apply to inspection of process stability)
GB/T 9286-1998 Paints and varnishes - Cross cut test for films
GB 11614-1999 Float glass
GB/T 13452.2-1992 Paints and varnishes - Determination of film thickness
QB/T 3826-1999 Corrosion-resistant testing method of the metal deposits and conversion coatings for the light industrial products neutral salt spraying test (NSS)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
structural fittings
parts assembled with glass, such as frame, support, base, chain, board and nail
Foreword I
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Requirements
6 Test methods
Annex A (Normative) Copper-accelerated acetic acid-salt spray (fog) testing (CASS test)
