1 Scope
This standard specifies technical requirements, test methods, inspection rules as well as marking, packaging, transport and storage of aerosol air freshener.
This standard is applicable to aerosol air freshener with liquefied petroleum gas (LPG) and/or dimethyl ether (DME) used for aerosol products as propellants.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB 7916-1987 Hygienic Standard for Cosmetics
GB/T 7917-1987 Standard Method of Hygienic Test for Cosmetics (all Parts)
GB 13042-1998 Packaging Containers-Aerosol Cans
GB/T 14449-1993 Test Methods for Aerosol Products
GB 17447-1998 Aerosol Valve
BB 0005-1995 Marking of Aerosol Products
JJF 1070-2000 Rules of Metrological Testing for Net Quantity of Products in Prepackages with Fixed Content
3 Requirements
3.1
aerosol cans and aerosol valve
aerosol can and aerosols valve used for aerosol air freshener shall meet those specified in GB 13042 and GB 17447, and it may be used only under the condition of having factory certificate of the manufacturer
3.2
raw material
raw material shall meet those specified in GB 7916
3.3
physical and chemical indexes
physical and chemical indexes shall meet those specified in Table 1
Foreword i
1 Scope
2 Normative References
3 Requirements
4 Test Methods
5 Inspection Rules
6 Marking, Packaging, Transport and Storage
