标准编号:	NB/T 47018.6-2011
中文名称:	承压设备用焊接材料订货技术条件 第6部分：铝及铝合金焊丝和填充丝
英文名称:	Technical permission of welding materials for pressure equipment - Part 6: Bare aluminum and aluminum-alloy welding electrodes and rods
行业分类:	NB    能源行业标准
发布机构:	国家能源局
发布日期:	2011-7-1
实施日期:	2011-10-1
标准状态:	superseded
被新标准替代:	NB/T 47018.6-2022 承压设备用焊接材料订货技术条件 第6部分：铝及铝合金焊丝和填充丝
被替代日期:	2022-12-31
替代旧标准:	JB/T 4747-2002 压力容器用钢焊条订货技术条件
翻译语言:	英文
文件格式:	PDF
中文字符数:	6000 字
翻译价格(元):	180.0
交付时间:	付款后 1 个工作日

1 Scope This Section of NB/T 47018 specifies the model preparation, technical requirements, test methods and inspection rules of bare aluminum and aluminum-alloy welding electrodes and rods. This Section is applicable to the bare aluminum and aluminum-alloy welding electrodes and rods used for the gas welding, gas tungsten arc welding, gas metal arc welding and plasma arc welding of pressure equipment. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies. GB/T 2653 Bend Test Methods on Welded Joints GB/T 10858 Aluminum and Aluminum Alloy Welding Rods and Wires GB/T 20975 (All Parts) Methods for Chemical Analysis of Aluminum and Aluminum Alloys NB/T 47018.1 Technical Permission of Welding Materials for Pressure Equipment - Section 1: General Rule JB/T 4730.2 Nondestructive Testing of Pressure Equipment - Part 2: Radiographic Testing

Foreword I 1 Scope 2 Normative References 3 Model 4 Technical Repuirements 5 Test Methods and Inspection Rules 6 Identification