标准编号:	MT/T 101-1993
中文名称:	刮板输送机用减速器检验规范
英文名称:	Inspecting specification for gearbox of chain conveyors
中标分类:	D98    煤矿专用设备器材
行业分类:	MT    煤炭行业标准
发布机构:	国家能源局
发布日期:	1985-1-1
实施日期:	1993-10-1
标准状态:	superseded
被新标准替代:	MT/T 101-2000 刮板输送机用减速器检验规范
被替代日期:	2000-5-1
替代旧标准:	MT 101-1985
翻译语言:	英文
文件格式:	PDF
中文字符数:	6000 字
翻译价格(元):	420.0
交付时间:	付款后 1 个工作日

1 Main Contents and Scope of Application This standard specifies the inspecting type and method of the Gearbox for Chain Conveyors. This standard is applicable to gearbox of chain conveyors specified in MT 148; also is applicable to gearbox of the belt conveyor. 2 Normative References MT 148 Gearbox for Chain Conveyors 3 Inspecting Type a. Type inspection; b. Delivery inspection 4 If Any One belongs to the Following Conditions, the Type Inspection shall be Carried Out: a. Trial production of new products (including interplant transfer of old products); b. When changes in the design, technology, material etc. that may affect the product performance; c. Reinstate the production after production halts two years; d. Inspections for products produced in batch are carried out once each lustrum (extend the time when there is routine inspection and random inspection by national quality inspection center); e. Where the users have disagreement on product quality and propose arbitration.