1.0.1 This specification is formulated in order to make the application architectural glass in the construction engineering achieve safety, reliability, economy and rationability, utilibility and aesthetic appearance.
1.0.2 This specification is applicable to the design and installation of architectural glass.
1.0.3 Not only the requirements stipulated in this specification, but also those in the current relevant ones of the nation shall be complied with in the application of architectural glass.
1 General Provisions
2 Terms
3 Basic Requirements
3.1 Load and the Effect
3.2 Design Criteria
4 Material
4.1 Glass
4.2 Glass Installation Material
5 Design for Wind Load Resistance of Architectural Glass
5.1 Calculation of Wind Load
5.2 Design for Wind Load Resistance
6 Design and Measures for Thermal Break Resistance of Architectural Glass
6.1 Design for Thermal Break Resistance
6.2 Measures for Thermal Break Resistance
7 Requirements on Body Impact Resistance of Architectural Glass
7.1 General Requirements
7.2 Selection of Glass
7.3 Protection Measures
8 Design for Shutter Glass and Roof Glass
8.1 Shutter Glass
8.2 Roof Glass
9 Design for Floor and Stairway Glazing
9.1 General Requirements
9.2 Design Calculation of Frame-supported Floor and Stairway Glazing
9.3 Design Calculation of Floor and Stairway Glazing Supported by by Four Points
10 Design for Underwater Glass
10.1 Performance Requirements of Underwater Glass
10.2 Design Calculation of Underwater Glass
11 Installation
11.1 Requirements of Installation Dimension
11.2 Use of Installation Materials of Glass
11.3 Installation Requirements of Lateral Displacement Resistance of Glass
Appendix A Calculation Method of Coefficient of Glass Heat Transfer
Appendix B Calculation Method of Dew Point for Architectural Glass
Appendix C Calculation Parameter for Design for Wind-load Resistance of Glass
Appendix D Calculation Method of Central Temperature and Frame Temperature of Glass Sheet
Explanation of Wording in this specification
List of Quoted Standards
