1 Scope
This standard specifies the technical specification for the vibration (velocity) of cylindrical roller bearing (hereinafter referred to as bearing) with radial internal clearance in accordance with Group 0 clearance specified by GB/T 4604-2006, of the Types A, Type, NJ and NF with diameter series 2 and 3, and nominal bore diameter 15mm~120mm specified in GB/T 283-2007.
Group V specified in this standard is the basic requirements for the general bearing vibration (velocity) without "V" marked on the bearing; Group V1, V2 and V2 are applicable to the bearing with requirements for vibration (velocity).
This standard is applicable to the manufacturer's production inspection and user acceptance of finished bearing.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding amending errors in the text) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative documents referred to applies.
Foreword I
1 Scope
2 Normative References
3 Terms, Definitions and Group Code
4 Measurement and Assessment Method
5 Technical Requirement
6 Inspection Rule
Appendix A (Normative) Cylindrical Roller Bearing - Measuring Methods for Vibration (Velocity)
A.1 Scope
A.2 Measurement Procedure
A.3 Measurement and Assessment Method
A.4 Measurement Condition
A.5 Requirements of Measurement System
A.6 Requirements for the Operator
Appendix B (Normative) Measurement Method of Mandrel Radial Circular Runout and Axial Circular Runout
Appendix C (Normative) Measurement Method of Foundation Vibration of Test Device
