1 Scope
This Part of JB/T 8137 specifies model, materials, specification, technical requirements, acceptance rules, inspection method, application and storage as well as packing and marking of the delivery drums for electric wires and cables.
This Part is applicable to cable drum for delivery of electrical wires and cables and the recovered and repaired cable drum, which are hereinafter referred to as "delivery drums".
This Part is not applicable to delivery drums for winding wires.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the dated edition of the normative reference referred to applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 2900.10 Electrotechnical Vocabulary - Electric Cables
GB/T 2900.40 Electrotechnical Terminology - Machinery and Equipment for Electric Wires and Cables
3 Terms and Definitions
For the purpose of this Part, the terms and definitions established in GB/T 2900.10 and GB/T 2900.40 and the following ones apply.
3.1
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Symbols and Codes
5 Materials
6 Specification
7 Outer Protection Plate for the Delivery Drums
8 Acceptance Rules
9 Inspection Methods
10 Inspection Items
11 Application and Storage
12 Packing and Marking
Appendix A (Informative) Traying Length Reference
