1 Scope
This standard specifies such contents as requirements, test methods, inspection rules, and marking, packaging, transportation and storage of industrial X-ray image intensifier imaging system.
This standard is applicable to industrial X-ray image intensifier imaging system (hereinafter referred to as “the system”).
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendment) applies.
GB/T 191 Packaging-Pictorial Marking for Handling of Goods
GB/T 13384-2008 General Specifications for Packing of Mechanical and Electrical Product
GB/T 23903 Resolution Indicators for Ray Image
JB/T 7902-2006 Non-Destructive Testing-Image Quality Indicators (Wire Type) for Radiographic Testing
JB/T 9329 Basic Environmental Conditions and Testing Methods for Instruments Transportation and Storage in the Transportation
Contents
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Requirements
4.1 Normal Working Conditions
4.2 Technical Performance
4.3 Safety and Environmental Protection
5 Main Components
5.1 Monitor
5.2 Image Intensifier
5.3 X-ray Machine
5.4 Optical Lens
6 Test Methods
6.1 Test Instruments
6.2 Test Conditions
6.3 Test Procedures
7 Inspection Rules
7.1 Delivery Inspection
7.2 Type Inspection
7.3 Sampling and Judgment Rules
8 Marking, Packaging, Transportation and Storage
8.1 Marking
8.2 Packaging
8.3 Transportation
8.4 Storage
Appendix A (Normative) Test Block Used for System IQI Sensitivity Test
