1.1 This standard specifies manufacturing, inspection, and acceptance requirements of formed heads for steel pressure vessels, and simultaneously, present usual pattern and parameter of formed heads for steel pressure vessels.
1.2 Patterns and parameters presented by this standard are applicable to formed heads for steel pressure vessels shaped by stamping, flow forming, and rolling with complete board or plate alignment of types listed in table 1.
1.3 Manufacturing, inspection and acceptance requirements specified in this standard is both applicable to heads listed in table 1 and ellipsoidal, dished, edge fold conical and spherical cap heads for steel pressure vessels shaped by complete board or plate alignment with other types and parameters by stamping, flow forming and rolling.
Foreword
1 Scope
2 Normative references
3 Symbols
4 Pattern parameters and markings
5 Materials
6 Manufacture, inspection and acceptance
7 Documentation of outgoing quality
8 Oil painting, packing and transportation
Appendix A (Informative) Thickness reduction rate for forming head
Appendix B (Informative) Parameters of EHA ellipsoidal head pattern
Appendix C (Informative) Parameters of EHB ellipsoidal head pattern
Appendix D (Informative) Parameters of DHA dished head pattern
Appendix E (Informative) Parameters of DHB dished head pattern
Appendix F (Informative) Parameters of CHA conical head pattern
Appendix G (Informative) Parameters of CHB conical head pattern
Appendix H (Informative) Parameters of CHC conical head pattern
Appendix I (Informative) Parameters of PSH spherical cap end socket pattern
