1 Scope
This part of JB/T 1647 specifies the types and basic parameters of straight-sided mechanical power press.
This part is applicable to newly designed straight-side single, two and four-point presses for general use.
2 Types
The types of presses are divided into straight-side single point press (see Figure 1), straight-side two-point press and straight-side four-point press (see Figure 2).
Foreword i
1 Scope
2 Types
3 Basic parameters
Figure 1 Straight-side single-point press
Figure 2 Straight-side two-point press and straight-side four-point press
Table 1 Nominal force range of straight-side single, two and four-point press
Table 2 The basic parameters of straight-side single-point press
Table 3 The basic parameters of straight-side two-point press
Table 4 The basic parameters of straight-side four-point press
Table 5 Series parameters of accessory cushion of straight-side one point press
Table 6 Series parameters of accessory cushion of the straight-side two-point press
Table 7 Series parameters of accessory cushion of the straight-side four-point press
