1 Scope
This standard specifies the terms and definitions, classification and model, requirements, test methods, inspection rules as well as marking, packaging, transportation and storage of lithium-ion manganese oxide battery module composed of lithium-ion manganese oxide battery greater than or equal to 6A•h.
2 Normative References
The following documents are indispensable for the application of this document. For dated references, only the dated editions apply. For undated references, the latest editions (including any amendments) apply.
GB 2893-2008 Safety Colors
GB 2894-2008 Safety Signs and Guideline for the Use
GB 4208-2008 Degrees of Protection Provided by Enclosure (IP Code)
GB 4824-2004 Industrial, Scientific and Medical (ISM) Radio-frequency Equipment - Electromagnetic Disturbance Characteristics - Limits and Methods of Measurement
GB/T 5465.2-2008 Graphical Symbols for Use on Electrical Equipment - Part 2: Graphical Symbols
GB/T 17626.2-2006 Electromagnetic Compatibility - Testing and Measurement Techniques - Electrostatic Discharge Immunity Test
GB/T 17626.3-2006 Electromagnetic Compatibility - Testing and Measurement Techniques - Radiated Radio-frequency Electromagnetic Field Immunity Test
GB/T 17626.4-2008 Electromagnetic Compatibility - Testing and Measurement Techniques - Electrical Fast Transient/Burst Immunity Test
GB/T 17626.5-2008 Electromagnetic Compatibility - Testing and Measurement Techniques - Surge(Impact) Immunity Test
GB/T 17626.6-2008 Electromagnetic compatibility - Testing and Measurement Techniques - Immunity to Conducted Disturbances Induced by Radio-frequency Fields
JB/T 11137-2011 General Requirement of Lithium-ion Battery Assembly
JB/T 11138-2011 Interface and Communication Protocol of Lithium-ion Battery Assembly
JB/T 11141-2011 General Requirement for Module Case of Lithium-ion Battery
SJ/T 11364-2006 Marking for Control of Pollution Caused by Electronic Information Products
3 Terms and Definitions
For this document, the terms and definitions defined in JB/T 11137-2011 apply.
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification and Model
4.1 Classification
4.2 Model
4.3 Component of Lithium-ion Manganese Oxide Battery Module
5 Technical Requirements
5.1 Appearance
5.2 Polarity
5.3 Overall Dimension and Mass
5.4 Technical Requirements
5.5 Safety
5.6 Environmental Requirements
5.7 Electromagnetic Compatibility (EMC)
6 Test Methods
6.1 Test Conditions
6.2 Appearance
6.3 Polarity
6.4 Overall Dimension and Mass
6.5 Consistency Test of Lithium Manganite Battery Module
6.6 Interface and Communication Protocol
6.7 Electric Energy (kW•h) Test
6.8 Service Life Test
6.9 Peak Consumption Power
6.10 Insulation Resistance
6.11 Electromagnetic Compatibility Test
7 Inspection
7.1 Classification
7.2 Ex-factory Inspection
7.3 Type Test
7.4 Inspection Rules
8 Marking, Packaging, Transportation and Storage
8.1 Marking
8.2 Packaging
8.3 Transportation and Storage
Appendix A (Normative) Component of Lithium-ion Manganese Oxide Battery Module
A.1 General
A.2 Component of Standard Type Battery Module
A.3 Component of Balanced Type Battery Module
A.4 Component of Basic Type Battery Module
A.5 Component of I/O Type Battery Module
Appendix B (Informative) Preferred Series of Energy Type Lithium-ion Manganese Oxide Battery
Figure 1 Expression Method of Model of Lithium-ion Manganese Oxide Battery Module
Figure 2 Installation Position of Fast Acting Fuse
Figure 3 Circuit for Electromagnetic Compatibility Test
Figure 4 Lithium-ion Battery Module Safety Marking
Figure A.1 Component of Standard Type Battery Module
Figure A.2 Component of Balanced Type Battery Module
Figure A.3 Component of Basic Type Battery Module
Figure A.4 Component of External I/O Type Battery Module
Figure A.5 Component of Internal I/O Type Battery Module
Table 1 Preferred Series of Energy Type Lithium-ion Manganese Oxide Battery
Table 2 Preferred Series of Power Type Lithium-ion Manganese Oxide Battery
Table 3 Test Requirements Reliability of Lithium-ion Manganese Oxide Battery Module Interface and Communication Protocol
Table 4 Nominal Voltage and Working Voltage Range of Energy Type Lithium-ion Manganese Oxide Battery Module
Table 5 Nominal Voltage and Working Voltage Range of Power Type Lithium-ion Manganese Oxide Battery Module
Table 6 Component of Attribute Definition Equipment for Lithium-ion Battery Module
Table 7 Inspection Rules
Table B.1 Models and Specifications of Energy Type Lithium-ion Manganese Oxide Battery Module (24V Series)
Table B.2 Models and Specification of Energy Type Lithium-ion Manganese Oxide Battery Module (36 V Series)
Table B.3 Models and Specification of Energy Type Lithium-ion Manganese Oxide Battery Module (48V Series)
Table B.4 Models and Specification of Energy Type Lithium-ion Manganese Oxide Battery Module (72 V Series)
