1. Scope
Methods in this standard include Method A and Method B. Method A is applicable to determine pull-out force of upper band of slippers or sandals manufactured by cold bonding process. Method B is applicable to determine pull-out force of upper band of slippers or sandals manufactured by assembling process rather than by mould pressing or injection molding.
2. Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. At time of publication, the editions indicated are valid. As all the standards will be revised, each party using this standard shall discuss the possibility of using the latest edition of the following standards.
GB 2941-91 Rubber - Standard Temperatures, Humidities and Times for the Conditioning Environmental and Testing of Test Pieces (eqv ISO 471:1983, ISO 1826:1981)
GB/T 10508-89 Rubber - Plastics Sandals and Slippers
3. Definition
For this standard, the following definition applies:
Pull-out force of upper band: the force required by pulling out upper band with certain width according to the method required.
Foreword
1. Scope
2. Normative References
3. Definition
4. Principle
5. Test Apparatus
6 Specimen
7. Test Procedure
8. Test Result
9. Test Report
