1.1 Objectives
1.1.1 This safety guidance document aims at offering the guidance to design management system of radioactive wastes in nuclear power plant; pointing out the design objective & system requirements which shall be satisfied and providing with equipment design suggestions.
1.1.2 This safety guidance document shall be used together with other nuclear safety codes and safety guidance documents on the safe operation, environmental protection, radiation protection and waste management of nuclear power plant.
1.2 Scope
1.2.1 This guidance document is applicable to the design of radioactive-wastes management system in thermal-reactor (such as pressurized water reactor, boiling water reactor, gas cooled reactor and CANDU) nuclear power plant; it specifies the design, construction and performance requirements of the management system for waste gas, waste liquid and solid waste; in addition, it also specifies in-plant wastes storage and transportation.
1.2.2 This guidance document is neither involved with the design of nuclear power plant overhaul, ex-service radioactive-wastes management system or spent fuel storage facilities nor involved with the design relating to accidents or radioactive-substance escape.
Contents
1 Introduction
1.1 Objectives
1.2 Scope
2 Design Objectives
2.1 Safety Objective
2.2 Performance Objectives:
2.3 Operation Objective
3 System Requirements
3.1 Standard Requirements
3.2 Technological Requirements
3.3 System Design and Construction
3.4 Quality Assurance
3.5 Other Matters to Be Considered
4 Equipments and Materials
4.1 General Requirements and Suggestions
4.2 Waste Gas Disposal System
4.3 Liquid Waste Disposal System
4.4 Solid Waste Disposal System
4.5 Volume Reduction System
5 Waste Storages and Transportations
5.1 Waste Storage
5.2 Waste In-plant Transportation
5.3 Waste Out-plant Transportation
6 Control Devices and Measuring Instruments
6.1 System Control and Monitoring
6.2 Monitoring of Radioactive Effluents and Waste Drum
7 Arrangements
7.1 General Requirements
7.2 Shielding
7.3 Operating Requirements and Suggestions
7.4 Maintenance Requirements and Suggestions
7.5 Fire Prevention
8 System Disposal Capacities and Redundancy
8.1 System Disposal Capacity
8.2 Redundancy
9 System Test and Debugging
9.1 System Cleaning
9.2 System integrity test
9.3 Functional Test and Debugging
10 Documents
10.1 Document Quality
10.2 Design Criteria
10.3 Basic Document
10.4 Technology Data or Information
Glossary
Annex A Waste Sources
A1 Waste Gas
A2 Liquid Waste
A3 Solid Waste
Annex B Schematic Diagram on the Disposal System of Radioactive Wastes in Nuclear Power Plants
