1 Scope
This standard specifies classification, requirements, test methods, inspection rules, marking, packaging, transport and storage of hydraulic excavators.
This standard is applicable to hydraulic excavators (hereafter referred to as excavators) with the operating mass no larger than 200t.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 3766 Hydraulic fluid power—General rules relating to systems (GB/T 3766-2001, eqv ISO 4413:1998)
GB 5226.1 Safety of machinery—Electrical equipment of machines—Part 1: general requirements (GB 5226.1-2002, IEC 60204-1:2000, IDT)
GB/T 6572.1 Hydraulic excavators—Terminology (GB/T 6572.1-1997, eqv ISO 7135:1993)
GB/T 7586 Hydraulic excavators—Test methods
GB/T 8419 Earth-moving machinery—Laboratory evaluation of operator seat vibration (GB/T 8419-2007, ISO 7096:2000, IDT)
GB/T 8498-2008 Earth-moving machinery—Basic type—Identification and terms and definitions (ISO 6165:2006, IDT)
GB/T 8499 Earth-moving machinery method for locating the centre of gravity (GB/T 8499-1987, ISO 5005:1977, IDT)
GB/T 8595 Earth-moving machinery—Operators controls (GB/T 8595-2008, ISO 10968:2004, IDT)
GB 9656 Safety glazing materials for road vehicles (GB 9656-2003, ECE R43:2000, NEQ)
GB/T 10913 Earth-moving machinery—Determination of ground speed (GB/T 10913-2005, ISO 6014:1986, MOD)
GB/T 13331 Earth-moving machinery—Hydraulic excavators—Lift capacity (GB/T 13331-2005, ISO 10567:1992, IDT)
GB/T 13332 Earth-moving machinery—Hydraulic excavators and backhoe loaders—Methods of determining tool forces (GB/T 13332-2008, ISO 6015:2006, IDT)
GB/T 14039-2002 Hydraulic fluid power—Fluids—Method for coding the level of contamination by solid particles (ISO 4406:1999, MOD)
GB 16710.1 Earth-moving machinery—Noise limits
GB/T 16710.2 Measurement of exterior noise emitted by earth-moving machinery—Stationary test conditions
GB/T 16710.3 Measurement at the operators position of noise emitted by earth-moving machinery—Stationary test conditions
GB/T 16710.4 Measurement of exterior noise emitted by earth-moving machinery—Dynamic test conditions (GB/T 16710.4-1996, eqv ISO 6395:1988)
GB/T 16710.5 Measurement at the operators position of noise emitted by earth-moving machinery—Dynamic test conditions (GB/T 16710.5-1996, eqv ISO 6396:1992)
GB/T 16936 Earth-moving machinery—Test code of net power for engines (GB/T 16936-2007, ISO 9249:1997, MOD)
GB/T 17921 Earth-moving machinery—Seat belts and seat belt anchorages (GB/T 17921-1999, idt ISO 6683:1981)
GB 19151 Warning triangles for motor vehicle (GB 19151-2003, ECE R27:1992, NEQ)
GB 19517 National safety technical code for electric equipments
GB/T l9929 Earth-moving machinery—Crawler machines—Performance requirements and test procedures for braking systems (GB/T 19929-2005, ISO 10265:1998, MOD)
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification
5 Requirements
6 Test Method
7 Inspection Rules
8 Marking, Packaging, Transport and Storage
Annex A (Informative) List for Main Parameters of the Excavator
