标准编号:	GB/T 882-2008
中文名称:	销轴
英文名称:	Clevis pin with head
中标分类:	J13    紧固件
行业分类:	GB    国家标准
ICS分类:	21.060.10 21.060.10    螺栓、螺钉、螺柱 21.060.10
发布机构:	中国机械工业联合会
发布日期:	2008-08-25
实施日期:	2009-2-1
标准状态:	valid
替代旧标准:	GB/T 882-1986 销轴
翻译语言:	英文
文件格式:	PDF
中文字符数:	4000 字
翻译价格(元):	280.0
交付时间:	付款后 1 个工作日

1 Scope This standard specifies the characteristics of clevis pins with head, with metric dimensions and nominal diameters, d, from 3 to 100 mm inclusive. 2 Normative References The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. GB/T 90.1 Fasteners — Acceptance inspection (GB/T 90.1-2002, idt ISO 3269:2000) GB/T 90.2 Fasteners — Marking and packaging GB/T 91 Split pins (GB/T 91-2000, eqv ISO 1234:1997) GB/T 1237 Designation system for fasteners (GB/T 1237-2000, eqv ISO 8991:1986) GB/T 5267.1 Fasteners — Electroplated coatings (GB/T 5267.1-2002, idt ISO 4042:1999) GB/T 11376 Phosphate conversion coatings for metals (GB/T 11376-1997, eqv ISO 9717:1990)