标准编号:	GB/T 879.1-2018
中文名称:	弹性圆柱销 直槽 重型
英文名称:	Spring-type straight pins—Slotted—Heavy duty
中标分类:	J13    紧固件
行业分类:	GB    国家标准
ICS分类:	21.060.10 21.060.10    螺栓、螺钉、螺柱 21.060.10
发布机构:	国家市场监督管理总局 国家标准化管理委员会
发布日期:	2018-12-28
实施日期:	2019-7-1
标准状态:	valid
替代旧标准:	GB/T 879.1-2000 弹性圆柱销 直槽 重型
翻译语言:	英文
文件格式:	PDF
中文字符数:	11000 字
翻译价格(元):	280.0
交付时间:	付款后 1 个工作日

GB/T 879.1:2018 Spring-type straight pins - Slotted - Heavy duty 1 Scope This part of GB/T 879 specifies the types, dimensions, applications, specifications and designations of slotted heavy duty spring-type straight pins. This part is applicable to the slotted spring-type straight pins, made of steel or of austenitic or martensitic stainless steel, heavy duty with nominal diameter, d1, from 1 mm to 50 mm. Note: The nominal diameters have been chosen in such a way that pins may be fitted one into the other or combined with pins, light duty in accordance with GB/T 879.2. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 90.1 Fasteners - Acceptance inspection (GB/T 90.1-2002, idt ISO 3269: 2000) GB/T 90.2 Fasteners - Marking and packaging GB/T 879.2 Spring-type straight pins - Slotted - Light duty (GB/T 879.2-2018, ISO 13337: 2009, MOD) GB/T 1237 Designation system for fasteners (GB/T 1237-2000, eqv ISO 8991: 1986) GB/T 4340.1 Metallic materials - Vickers hardness test - Part 1: Test method (GB/T 4340.1-2009, ISO 6507-1: 2005, MOD) GB/T 5267.1 Fasteners - Electroplated coatings (GB/T 5267.1-2002, ISO 4042: 1999, IDT) GB/T 5267.2 Fasteners - Non-electrolytically applied zinc flake coatings (GB/T 5267.2-2002, ISO 10683: 2000, IDT) GB/T 5267.4 Passivation of corrosion-resistant stainless-steel fasteners (GB/T 5267.4-2009, ISO 16048: 2003, IDT) GB/T 11376 Phosphate conversion coatings for metals (GB/T 11376-1997, eqv ISO 9717: 1990) GB/T 13683 Pins and grooved pins - Shear test (GB/T 13683-1992, eqv ISO 8749: 1986) GB/T 15519 Chemical conversion coatings--Black oxide coating on iron and steel--Specification and test methods (GB/T 15519-2002, ISO 11408: 1999, MOD)   3 Type and dimension Type and dimension of pins are detailed in Figure 1 and Table 1.

Foreword i 1 Scope 2 Normative references 3 Type and dimension 4 Application 5 Technical conditions and referenced standards 6 Designation