1 Scope
This standard specifies the requirements, test methods, inspection rules, marking, packaging and transportation, etc. of the intaglio prints for decorating.
This standard is applicable to plastic film and cellophane prints for decorating and packaging composite film prints produced by intaglio printing process.
This standard is not applicable to paper intaglio prints for decorating.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions, of any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest editions apply.
GB/T 2792-1998 Test method for peel strength of pressure-sensitive tape at 180° angle (eqv JISZ 0237: 1991)
GB/T 2828.1 Sampling procedures for inspection by attributes - Part1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (GB/T 2828.1-2003, ISO 2859-1: 1999, IDT)
GB/T 18722 Graphic technology - Application of reflection densitometry and colorimetry to process control in graphic arts (GB/T 18722-2002, eqv ISO 13656: 2000)
CY/T 3 Standard illuminating and observing conditions for color evaluation
ISO 13655 Graphic technology - Spectral measurement and colorimetric computation for graphic arts images
ISO 14981 Graphic technology - Process control - Optical, geometrical and metrological requirements for reflection densitometers for graphic arts use
ISO 15994 Graphic technology - Testing of prints - Visual luster
3 Terms and definitions
For the purpose of this standard, the following terms and definitions apply.
3.1
recess printing
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Technical requirements
5 Inspection methods
6 Inspection rules
7 Marking, packaging, transportation and storage
Annex A (Normative) Tape for ink layer fastness test
Bibliography
