1 Scope
This standard specifies the characteristics of hexagon nuts, style 1, with thread specification of M8×1~M64×4, with fine pitch thread, with property class of 6, 8, 10, A2-50, A2-70, A4-50, A4-70, CU2, CU3 and AL4, with product grade A for sizes D up to and including 16mm and product grade B for sizes D over 16mm.
If, in special cases, specifications other than those listed in this standard are required, they shall be selected from current standards, for example GB/T 196, GB/T 3098.4, GB/T 3098.15 and GB/T 3103.1.
Coarse thread hexagon nuts according to GB/T 6170 shall be the first choice.
Note: For hexagon nuts, style 2, with fine pitch thread, see GB/T 6176.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. At time of publication, all the editions listed are valid. All standards are subject to revision. Parties to agreements based on this standard are encouraged to investigate the possibility of applying the latest editions of the standards indicated below.
GB/T 90-1985 Acceptance Inspection, Marking and Packaging of Fasteners
GB/T 196-1981 General Purpose Screw Threads - Basic Dimensions for Diameter from 1 to 600mm
GB/T 197-1981 General Purpose Screw Threads - Tolerances and Fits for Diameter from 1 to 355mm
GB/T 1237-2000 Designation System for Fasteners
GB/T 3098.4-2000 Mechanical Properties of Fasteners - Nuts - Fine Pitch Thread
Foreword I
ISO Foreword III
ISO Introduction III
1 Scope
2 Normative References
3 Dimensions
4 Specifications and Reference Standards
5 Designation
