1 Scope
This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation and storage as well as safety of acetone for industrial use.
This standard is applicable to acetone for industrial use prepared by cumene method and fermentation method.
Molecular formula: (CH3)2CO
Relative molecular mass: 58.08 (according to international relative atomic mass in 2007).
2 Normative references
The following referenced documents are indispensable for the application of this standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 190 Packing symbol of dangerous goods
GB/T 601 Chemical reagent—Preparations of reference titration solutions
GB/T 603 Chemical reagent—Preparations of reagent solutions for use in test methods
GB/T 2366 Determination of water content in industrial chemicals—Gas chromatographic method
GB/T 3143 Color determination method of liquid chemicals (Hazen unit—platinum—cobalt scale)
GB/T 4472 Determination of density and relative density for chemical products
GB/T 6283 Chemical products—Determination of water—Karl·Fischer method (general method)
GB/T 6324.1 Test method of organic chemical products—Part 1: Water miscibility test of liquid organic chemical products
GB/T 6324.2 Test method of organic chemical products—Part 2: Determination of dry residue after evaporation on a water bath for volatile organic liquids
GB/T 6324.3 Test method of organic chemical products—Part 3: Determination of permangante-reducing substances
GB/T 6678 General principles for sampling chemical products
GB/T 6680 General rules for sampling liquid chemical products
GB/T 6682 Water for analytical laboratory use—Specification and test methods
GB/T 7534 Volatile organic liquids for industrial use—Determination of boiling range
GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values
GB 12463 General specifications for transport packages of dangerous goods
3 Requirements
3.1 Appearance: transparent liquid.
3.2 The acetone for industrial use shall meet the technical requirements specified in Table 1.
Foreword i
1 Scope
2 Normative references
3 Requirements
4 Test methods
5 Inspection rules
6 Marking, packaging, transportation and storage
7 Safety
Annex A (Normative) Determination of impurity content in acetone for industrial use by gas chromatography
Annex B (Informative) Comparison between this standard and ASTM D 329 in clause number
