Inflatable garment
1 Scope
This document specifies the requirements, inspection method, inspection rules, marking, packaging, transportation and storage of inflatable garments. This document is applicable to garments produced with glued inflatable fabric as the main material or inflatable liner.
This document is not applicable to garments for infants aged 36 months and below.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 250 Textiles - Tests for color fastness - Grey scale for assessing change in color
GB/T 1335 (all parts) Standard sizing systems for garments
GB/T 3921-2008 Textiles - Tests for colour fastness - Colour fastness to washing with soap or soap and soda
GB/T 4802.1 Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 1: Circular locus method
GB/T 4841.3 Colour cards of standard depths for dyeing with dyestuffs 2/1, 1/3, 1/6, 1/12, 1/25
GB/T 5296.4 Instructions for use of products of consumer interest - Part 4: Textiles and apparel
GB/T 7122 Adhesives - Determination of peel resistance of high-strength adhesive bonds - Floating roller method
GB/T 8427-2019 Textiles - Tests for color fastness - Color fastness to artificial light: xenon arc fading lamp test
GB/T 8629-2017 Textiles - Domestic washing and drying procedures for textile testing
GB/T 12704.2-2009 Textiles - Test method for water-vapour transmission of fabrics - Part 2: Water method
GB/T 14801 Test method for skewness and bow in woven and knitted fabrics
GB/T 15557 Standard terminology relating to apparel
GB/T 18398 Testing method for clothing thermal resistance - Thermal manikin method
GB 18401 National general safety technical code for textile products
GB/T 19976-2005 Textiles - Determination of bursting strength - Steel ball method
GB/T 21294-2014 Testing methods of physical and chemical performance of garments
GB/T 21295-2011 Requirements of physical and chemical performance of garments
GB/T 29862 Textiles - Identification of fiber content
GB/T 31127-2014 Textiles - Tests for color fastness - Color fastness to transfer in joints
GB 31701 Safety technical code for infants and children textile products
GB/T 31702 Testing method for sharpness of attached components on textile products
GB/T 31899-2015 Textile - Tests for weather resistance - UV light exposure
GB/T 31907 Method of garment measurement
FZ/T 80002 Marking, packaging, transportation and storage for garments
FZ/T 80004 Rule for garments delivery inspection
FZ/T 80007.1 Test method of peeled off strength value for garments used adhesive interlining
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 15557 as well as the following apply.
3.1
glued inflatable fabric
Inflatable composite fabrics with air channel, which is made of laminated fabric by hot pressing and gluing process
3.2
inflatable garment
garments with warming or cushioning effect after inflated by sewing cloth piece made of glued inflatable fabric or other fabrics with the glued inflatable fabric inner
3.3
gas retention time
time of gas pressure in inflatable fabric or inflatable liner dropping to a certain value
3.4
thermal regulating property
increased percentage of the thermal resistance of inflatable garment after inflation compared with that before inflation
4 Requirements
4.1 Instructions for use
4.1.1 The product instructions for use shall meet the requirements in GB/T 5296.4, and those of products for children aged from 3 to 14 shall also meet the requirements in GB 31701.
4.1.2 Warning signs shall be attached in relation to garment quality problems that may occur due to improper washing.
Example: Open the valve to exhaust the air before washing the product, then wash according to the washing instructions.
4.1.3 Warning signs shall be attached in relation to gluing quality problems that may occur due to excessive air pressure.
Example: Open the valve to exhaust the air before taking an aircraft such as airplane.
4.2 Size specifications
4.2.1 The size shall be selected according to those specified in GB/T 1335 (all parts).
4.2.2 The specification of main parts shall be designed according to the relevant requirements in GB/T 1335 (all parts).
