1 Subject content and application scope
This standard specifies the method for making local emission standards of air pollutants. This standard is applicable to guide all provinces, autonomous regions, municipalities directly under the Central Government and areas under their jurisdiction to make emission standards of air pollutants.
2 Normative references
GB 3095 Ambient air quality standards
GB 9137 Maximum allowable concentration of pollutants in atmosphere for protection crops
TJ 36 Hygienic standards for the design of industrial enterprises
3 General
3.1 This standard is formulated with a view to implementing the Environmental protection law of the People's Republic of China and the Law of the People's Republic of China on the prevention and control of atmospheric pollution.
3.2 This standard is a method standard to guide the making and revision of local emission standards of air pollutants.
3.3 This standard takes the air quality criteria as the control target and makes the local emission standards of air pollutants by using the method of controlling air pollution with the allowable limit of total emission and the allowable limit of point source emission in the control area (see 4.1 for definition) based on the diffusion and dilution rule of air pollutants. In addition, all localities can apply the best feasible and practical technical methods or other total emission control methods to make local emission standards of air pollutants according to local technical and economic conditions.
3.4 The allowable emission limits of pollutants listed in the emission standards of air pollutants made by all provinces, autonomous regions and municipalities directly under the Central Government shall not be greater than the emission limits calculated according the method given in this standard and the limits given in relevant national emission standards of air pollutants.
3.5 All provisions of this standard have the same effect under general conditions, but if the allowable emission limits determined in all articles of the same pollution source standard are inconsistent, the minimum allowable emission limit shall prevail.
3.6 The provisions in annexes are for reference when using this standard.
1 Subject content and application scope
2 Normative references
3 General
4 Total emission control area of gaseous air pollutants and functional areas of atmospheric environment
5 Method for making emission standards of gaseous air pollutants produced during the fuel combustion
6 Method for making emission standards for gaseous air pollutants produced in the production process
7 Control of unorganized emission of harmful gas and method for making health protection distance standard for industrial enterprises
8 Method for making smoke and dust emission standard
Annex A Method for making emission standards of air pollutants under complicated conditions (Supplementary)
Annex B Classification of atmospheric stability (Supplementary)
Annex C Characteristics of wind (Supplementary)
Annex D Determination of diffusion parameters (σy, oz) (Reference)
Annex E Mixed layer and calculation of pollutant concentration under mixed layer conditions (Reference)
Additional explanation
