标准编号:	GB/T 3098.5-2016
中文名称:	紧固件机械性能 自攻螺钉
英文名称:	Mechanical properties of fasteners - Tapping screws
中标分类:	J13    紧固件
行业分类:	GB    国家标准
ICS分类:	21.060.10 21.060.10    螺栓、螺钉、螺柱 21.060.10
发布机构:	中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:	2016-02-24
实施日期:	2016-6-1
标准状态:	valid
替代旧标准:	GB/T 3098.5-2000 紧固件机械性能 自攻螺钉
翻译语言:	英文
文件格式:	PDF
中文字符数:	7000 字
翻译价格(元):	240.0
交付时间:	付款后 1 个工作日

1 Scope This part specifies of GB/T 3098 specifies the materials, technical requirements and test methods of tapping screws. This part is applicable to tapping screws made from carburizing steel, with thread specification of ST 2.2~ST 9.5 and meeting the requirements of GB/T 5280. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 3098.13-1996 Mechanical Properties of Fasteners - Torsional Test and Minimum Torques for Bolts and Screws with Nominal Diameters 1mm to 10mm (idt ISO 898-7:1992) GB/T 4340.1 Metallic Materials - Vickers Hardness Test - Part 1: Test Method (GB/T 4340.1-2009, ISO 6507-1:2005, MOD) GB/T 5280 Tapping Screws Thread (GB/T 5280-2002, idt ISO 1478:1999) 3 Materials Tapping screws shall be made from cold heading, case hardening quality steel.

Foreword i 1 Scope 2 Normative References 3 Materials 4 Technical Requirements 5 Acceptance 6 Test Methods