1 Scope
This part specifies the mechanical property class, material, minimum shear load, minimum tensile load and mandrel breaking load of open-type and enclosed-type blind rivets with break pull mandrel, as well as the mechanical properties, like the disassembly force of mandrel and hold facility of nailhead, of the open-type blind rivets with break pull mandrel.
2 Normative References
The following normative documents contain provisions which, through reference in this part of GB/T 3098, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies.
GB/T 699 Quality Carbon Structural Steels
GB/T 1220 Stainless Steel Bars
GB/T 3098.18 Mechanical Properties of Fasteners - Blind Rivets Testing (GB/T 3098.18 2004, ISO 4589:2000, Blind Rivets - Mechanical Testing, IDT)
GB/T 3190 Wrought Aluminum and Aluminum Alloys - Chemical Composition Limits
GB/T 3206 Carbon Constructional Quality Steel Wires
GB/T 4232 Stainless Steel Wire for Cold Heading and Cold Forging
GB/T 5235 Wrought Nickel and nickel alloy - Chemical Composition and Forms of Wrought Products
GB/T 14956 Special Copper and Copper Alloy Wires
3 Mechanical Property Class
The mechanical property class of blind rivets with break pull mandrel is consisted of two figures, indicating the material combination or mechanical property of different nails and mandrels. For different blind rivets with break pull mandrel which are of the same mechanical property class, their mechanical properties are different (as shown in Tables 2&3; Tables 5&6).
Foreword
1 Scope
2 Normative References
3 Mechanical Property Class
4 Mechanical Properties
5 Test method
