标准编号:	GB/T 304.9-2008
中文名称:	关节轴承 通用技术规则
英文名称:	Spherical plain bearings - General technical regulations
中标分类:	J11    滚动轴承
行业分类:	GB    国家标准
ICS分类:	21.100.20 21.100.20    滚动轴承 21.100.20
发布机构:	中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:	2008-02-28
实施日期:	2008-8-1
标准状态:	superseded
被新标准替代:	GB/T 304.9-2021 关节轴承 第9部分：通用技术规则
被替代日期:	2022-7-1
替代旧标准:	JB/T 8879-2001 关节轴承 通用技术条件 GB/T 304.9-1981 向心关节轴承 技术条件
翻译语言:	英文
文件格式:	PDF
中文字符数:	4000 字
翻译价格(元):	240.0
交付时间:	付款后 1 个工作日

1 Scope This part of GB/T 304 specifies the general technical regulations of the spherical plain bearings for general purpose. This part is applicable to the spherical plain bearings of which the boundary dimensions meet those specified in GB/T 9161~9164 and is used for the bearing manufacturers' production and inspection and the customers' acceptance. This part is not applicable to the spherical plain bearings for special purpose. 2 Normative References The following normative documents contain provisions which, through reference in this part of GB/T 304, constitute provisions of this part. For dated references, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this part are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document referred to applies. GB/T 274 Rolling Bearings - Chamfer Dimension - Maximum Values (GB/T 274-2000, idt ISO 582: 1993) GB/T 304.1 Spherical Plain Bearings - Classification GB/T 304.2 Spherical Plain Bearings - Identification Code GB/T 304.3 Spherical Plain Bearings - Fits GB/T 307.2 Rolling Bearings - Measuring and Gauging Principles and Methods (GB/T 307.2-2005, ISO 1132-2: 2001, Rolling Bearings - Tolerances - Part 2: Measuring and Ganging Principles and Methods, MOD) GB/T 699 Quality Carbon Structural Steels GB/T 3944 Spherical Plain Bearings - Vocabulary (GB/T 3944-2002, ISO 6811: 1998, IDT) GB/T 4199 Rolling Bearings - Tolerances - Definitions (GB/T 4199-2003, ISO 1132-1: 2000, Rolling Bearings-Tolerances - Part 1: Terms and Definitions, MOD) GB/T 8597 Rolling Bearings-Rust Proof Packaging GB/T 9161 Spherical Plain Bearings - Spherical Plain Bearings Rod Ends (GB/T 9161-2001, eqv ISO 12240-4: 1998) GB/T 9162 Spherical Plain Bearings - Thrust Spherical Plain Bearings (GB/T 9162-2001, eqv ISO 12240-3: 1998) GB/T 9163 Spherical Plain Bearings-Radial Spherical Plain Bearings (GB/T 9163-2001, eqv ISO 12240-1: 1998)

Foreword I 1 Scope 2 Normative References 3 Terms and Definitions 4 Spherical Plain Bearings 5 Application of Spherical Plain Bearings