1 Scope
This standard specifies the site selection principles, power supply system, charging system, EV supervisor system, electric energy metering, carriage way, parking space, safety requirements, mark and identification of electric vehicle charging station (hereinafter referred to as charging station).
This standard is applicable to the charging station adopting vehicle charging mode for the conductive charging of electric vehicle power battery.
2 Normative References
The following documents are indispensable for the application of this document. For dated references, only the dated versions apply to this standard. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 14549-1993 Quality of Electric Energy Supply - Harmonics in Public Supply Network
GB/T 18487.1 Electric Vehicle Conductive Charging System - Part 1: General Requirements
GB 50016-2006 Code of Design on Building Fire Protection and Prevention
GB 50052 Code for Design of Electric Power Supply Systems
GB 50053 Code for Design of 10kv & under Electric Substation
GB 50054 Code for Design of Low Voltage Electrical Installations
GB 50057 Design Code for Protection of Structures against Lightning
GB 50058 Electrical Installations Design Code for Explosive Atmospheres and Fire Hazard
GB 50140 Code for Design of Extinguisher Distribution in Buildings
GB 50219 Code of Design for Water Spray Extinguishing Systems
GB 50229-2006 Code for Design of Fire Protection for Fossil Fuel Power Plants and Substations
DL/T 620 Overvoltage Protection and Insulation Coordination for AC Electrical Installations
DL 5027 Typical Rules of Fire Protection for Electric Power Installations
3 Terms and Definitions
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 General Provisions
5 Environmental Requirements
6 EV Power-supply System
7 EV Charging System
8 EV Supervisor System
9 Electric Energy Metering
10 Carriage Way and Parking Space
11 Safety Requirements
12 Mark and Identification
