1 Scope
This part of GB/T 29493 specifies the GC/MS method for the determination of polycyclic aromatic hydrocarbons in textile dyeing and finishing auxiliaries.
This part is applicable to the determination of polycyclic aromatic hydrocarbons in all kinds of textile dyeing and finishing auxiliaries.
2 Normative References
The following documents are indispensable for the application of this standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 8170-2008 Rules of Rounding off for Numerical Values & Expression and Judgment of Limiting Values
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
3.1
polycyclic aromatic hydrocarbons; PAHs
an aromatic hydrocarbon containing two or more condensed aromqatic nuclei. The condensed aromqatic nuclei may also have a short alkyl or cycloalkyl substituent
Note: the 16 polycyclic aromatic hydrocarbons determined in this part were promulgated and regulated by the Environmental Protection Agency (EPA) in 1979.
4 Theory
The PAHs in the sample shall be ultrasonically extracted with toluene, separated and detected by gas chromatography-mass spectrometry detector (GC/MSD), and quantified by internal standard method.
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Theory
5 Reagents and Materials
6 Instruments and Apparatus
7 Analytical Procedures
8 Blank Test
9 Result Calculation
10 Lower Determination Limit, Recovery Rate and Precision
11 Test Report
Annex A (Informative) GC-MC Analysis Diagram