1 Scope
This standard specifies the terms and definitions of the compressed hydrogen fuel cell vehicles in demonstration, the essential condition of the demonstration implementation, the prevention of danger in operation, start, parking and storage of the vehicles, filling of the hydrogen fuel, emergency plan and training for the accident, driving of the vehicles, etc.
This standard is applicable to the compressed hydrogen fuel cell vehicles in demonstration on designated road (hereinafter referred to as vehicles) with the rated working pressure of the hydrogen system not greater than 35 MPa.
2 Normative References
The following documents for the application of this document are essential. For dated references, only the dated edition applies to this document. For undated references, the latest edition (including any amendment) applies.
GB/T 24548 Fuel Cell Electric Vehicles-Terminology
GB/T 24549 Fuel Cell Electric Vehicles-Safety Requirements
GB/T 29124-2012 Specification for Supporting Facilities of Hydrogen Fuel Cell Vehicles in Demonstration
3 Terms and Definitions
For the purposes of this document, the following terms and definitions defined in GB/T 24548 apply.
3.1
DemonstrationThe process that the vehicles are subjected to practical application operation on the specified driving route and within the designated time range.
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Basic Conditions for Implementing Demonstration
5 Prevention of Danger in Operation
6 Start of Vehicles
7 Parking and Storage of Vehicles
8 Filling of Hydrogen Fuel
9 Emergency Plan and Training for Accident
10 Driving
