1Scope
This standard specifies the trimmed sizes for coats and suits.
This standard is applicable to the mass-produced coats and suits with textiles as the main fabric.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this part. For dated reference, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB/T 1335.1-1997 Size Designation of Clothes-Men
GB/T 1335.2-1997 Size Designation of Clothes-Women
3 Size Setting
3.1 The trimmed size series shall be set according to the values of control parts of each size designation series of clothes as stated in GB/T 1335.1-1997 and GB/T 1335.2-1997 plus different loose values.
3.2For Men’sZhongshan suits as well as men’s and women’s jackets, all parts shall be set with a group of sizes respectively, and the size for the same size designation may be selected according to groups.
3.3Specifications for other coats and suits may refer to examples in this standard.
4 Sizes for Men’sZhongshanSuits
Foreword I
1 Scope
2 Normative References
3 Size Setting
4 Sizes for Men’s Zhongshan Suits
5 Size for Men’s Jackets
6 Size for Women’s Jackets
