1 Scope
This standard specifies the requirement, inspection method, inspection classification rules, marking, packing, transport and storage of trouser, tailored skirt, etc.
This standard is applicable to woolen garments like trouser and tailored skirt mainly made of shell fabric such as woolen, wool blended, interweaved and wool-like woven fabrics.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments (excluding amending error in the text) to, or revisions of, any of these publications do not be applied. However, the parties whose enter into agreement according to these specifications are encouraged to research whether the latest editions of these references are applied or not. For undated references, the latest edition of the normative document is applicable to this Standard.
GB/T 250 Textiles- Tests for colour fastness - Grey scale for assessing change in colour
GB/T 1335.1 Standard sizing systems for garments - Men
GB/T 1335.2 Standard sizing systems for garments - Women
GB/T 1335.3 Standard sizing systems for garments - Children
GB/T 2910 Textile - Binary fibre mixtures - Quantitative chemical analysis
GB/T 2911 Textiles - Ternary fibre mixtures - Quantitative analysis
GB/T 2912.1 Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolized Formaldehyde (Water Extraction Method)
GB/T 3917.2 Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method)
GB/T 3920 Textiles - Tests for colour fastness - Colour fastness to rubbing
GB/T 3921 Textiles - Tests for colour fastness - colour fastness to soaping
GB/T 3922 Textiles - Testing method for colour fastness to perspiration
GB/T 3923.1 Testiles - Tensile properties of fabrics - Part 1: Determination of breaking force and elongation at breaking force - Strip method
GB/T 4802.1 Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 1: Circular locus method
GB/T 4841.3 Colour cards of standard depths for dyeing with dyestuffs 2/1, 1/3, 1/6, 1/12, 1/25
GB 5296.4 Instructions for use of products of consumer interest - Instructions for use of textiles and apparel
GB/T 5711 Textiles - Tests for colour fastness - Colour fastness to dry cleaning
GB/T 5713 Textiles - Tests for colour fastness - Colour fastness to water
GB/T 7573 Textiles - Determination of pH of the aqueous extract
GB/T 8170 Rules of Rounding off for Numerical Values & Expression and Judgement of Limiting Values
GB/T 8427-2008 Textiles - Tests for colour fastness - Colour fastness to artificial light: Xenon arc fading lamp test
GB/T 8630 Textiles-Determination of Dimensional Change in Washing and Drying
GB/T 14304 Sizes for wollen suits
GB/T 16988 Quantitative determination for mixtures of special animal fibre and wool
GB/T 17592 Textiles - Determination of the banned azo colourants
GB 18401 National General Safety Technical Code for Textile Products
FZ/T 01026 Textile - Quaternary fibre mixtures - Quantitative chemical analysis
FZ/T 01048 Determination method for blending ratio of silk and cashmere blended textiles
FZ/T 01053 Textiles - Identification of fiber content
FZ/T 01057 (all parts) Test method for identification of textile fibres
FZ/T 80002 Marking, packaging, transporation and storage for garments
FZ/T 80004 Rule for garments delivery inspection
FZ/T 80007.3 Dry wash resistance test method for garments used adhesive interlining
3 Requirements
3.1 Instructions for use
Instructions for use of finished product shall comply with the requirements of GB 5296.4 and GB 18401.
3.2 Size specification
3.2.1 Sizing systems shall be selected according to the requirements GB/T 1335.1, GB/T 1335.2 and GB/T 1335.3.
3.2.2 The sizing of main parts on finished product may be design by self according to the relevant requirements of GB/T 1335.1, GB/T 1335.2, GB/T 1335.3 and GB/T 14304.
3.3 Materials
3.3.1 Shell fabric
Shell fabric of conformity to the quality requirement of this Standard shall be selected according to the national criteria for textile shell fabric.
3.3.2 Lining
Except in special design, the lining with property and color matching with shell fabric used shall be adopted.
3.3.3 Accessories
3.3.3.1 Lining fabric
Lining fabric of suitability to shell fabric used shall be adopted, and the dimensional change ratio hereof shall be suitable to shell fabric.
3.3.3.2 Suture
Suture of suitability to quality of accessories and linings used shall be adopted. Button thread shall be suitable to button in color; trademark thread shall be suitable to trademark ground colour (except ornamental thread).
3.3.3.3 Button and auxiliaries
Button (except ornamental button) and auxiliaries of suitability to shell fabric used shall be adopted. Buttons and auxiliaries shall be rustless, smooth, durable, and free of deformation and discolouring after washing and ironing.
Foreword
1 Scope
2 Normative References
3 Requirements
4 Inspection (test) Method
6 Marking, Packaging, Transportation and Storage
Annex A (Normative) Test Methods for Skewing after Washing
Annex B (Normative) Test Methods for Seam Slipping Degree
Annex C (Normative) Sampling Location Schematic Diagram for Joint Strength Test of Seat Seam of Trousers
