标准编号:	GB/T 2529-2012
中文名称:	导电用铜板和条
英文名称:	Copper sheets and bars for electrical conduction purpose
中标分类:	H62    重金属及其合金
行业分类:	GB    国家标准
ICS分类:	77.150.30 77.150.30    铜产品 77.150.30
发布机构:	中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:	2012-12-31
实施日期:	2013-10-1
标准状态:	现行
替代旧标准:	GB/T 2529-2005 导电用铜板和条
翻译语言:	英文
文件格式:	PDF
中文字符数:	14000 字
翻译价格(元):	290.00 元
交付时间:	付款后 1 个工作日

1 Scope



This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation, storage and quality certificate, and contract (or purchase order) contents of the copper sheets and bars for electrical conduction purpose.



This standard is applicable to the copper sheets and bars for electrical conduction purpose in smelting, electric power, chemical, electroplating and other industrial sectors.



2 Normative references



The following referenced documents are indispensable for the application of this standard. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.



GB/T 228.1-2010 Metallic materials — Tensile testing — Part 1: Method of test at room temperature (ISO 6892-1: 2009, MOD)

GB/T 230.1 Metallic materials — Rockwell hardness test — Part 1: Test method

GB/T 232 Metallic materials — Bend test

GB/T 351 Metallic materials — Resistivity measurement method

GB/T 4340.1 Metallic materials — Vickers hardness test — Part 1: Test method (ISO 6507-1:2005, MOD)

GB/T 5121 (all parts) Methods for chemical analysis of copper and copper alloys

GB/T 5231 Wrought copper and copper alloys chemical composition limits and forms of wrought products

GB/T 8888 Wrought heavy non-ferrous metal products — Packing, marking, transporting and storing

GB/T 26303.3 Measuring methods for dimensions and shapes of wrought copper and copper alloys — Part 3: Sheets and strips

YS/T 478 The method for electrical conductivity measurement of copper and copper alloys by use of eddy current

YS/T 482 Methods for analysis of copper and copper alloys — The atomic emission spectrometry



3 Terms and definitions



For the purposes of this standard, the following term and definition apply.



3.1

straightness of longitudinal edge

deviation from absolute straightness of any longitudinal surface or edge, including the meanings of side curvature and flatness

Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test methods
6 Inspection rules
7 Marking, packaging, transportation, storage and quality certificate
8 Contract (or purchase order) contents