1 Scope
This standard specifies the dimensions, test methods and requirements for 60V and 600V single-core cables intended for use in road vehicle applications as well as additional test methods and requirements for 600V cables.
It applies to single-core cables intended for use in road vehicle application as well as individual cores in multi-core cables.
Eight temperature classes are defined in Table 1.
... ...
... ...
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition applies.
GB/T 2951.21 Common test methods for insulating and sheathing materials of electric and optical cables - Part 21: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests (GB/T 2951.21-2008, IEC 60811-2-1:2001, IDT)
... ...
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Dimensions
6 Electrical characteristics
7 Mechanical characteristics
8 Low-temperature characteristics
9 Resistance to abrasion
10 Heat ageing
11 Resistance to chemicals
12 Resistance to flame propagation
Annex A (Informative) Conductors
Annex B (Informative) Recommended colours
Annex C (Informative) High-volume (600 V) cable constructions
