1 Scope
This standard specifies the terms and definitions, classification and marking, requirements, test methods, inspection rules and Packaging, marking, transportation and storage of expansive agents for concrete.
This standard is applicable to calcium sulphoaluminate hydrate, calcium hydroxide category and calcium sulphoaluminate hydrate-calcium hydroxide powder expansive agents for concrete.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated reference, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 176 Method for chemical analysis of cement
GB/T 700 Carbon structural steels
GB/T 1345 The test sieving method for fineness of cement
GB/T 1346 Standard test method for water requirement for normal consistency setting time and soundness of the Portland cement
GB/T 1499.2 Steel for the reinforcement of concrete—Part 2:Hot rolled ribbed bars
GB/T 4357 Cold-drawn non-alloy steel wire for springs
GB/T 6003.1 Test sieves—Technical requirements and testing—Part 1:Test sieves of metal wire cloth
GB/T 8074 Testing method for specific surface of cement—Blaine method
GB 8076
Concrete admixtures
GB/T 12573 Sampling method of cement
GB/T 17671 Method of testing cements--Determination of strength
GB/T 50081 Standard for test method of mechanical properties on ordinary concrete
JGJ 63
Standard of water for concrete
YB/T 5241 Iron-nickel, iron-nickel-cobalt of low expansion
3 Terms and Definitions
Foreword i
Expansive agents for concrete
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification and Marking
5 Requirements
6 Test Method
7 Inspection Rules
8 Packaging, Marking, Transport and Storage
Annex A
A.1 General
A.2 Test method A
A.3 Test Methods B
B.1 Brief
B.2 Test Method A
B.3 Test Method B
Annex C
Annex D
