1 Scope
This part specifies the limits and methods of measurement of six hazardous substances in the telecommunication terminal products, i.e., lead (Pb), mercury (Hg), cadmium (Cd), hexavalent chromium [[Cr(VI)], polybrominated biphenyls (PBB), and polybrominated diphenyl ethers (PBDE).
For the purpose of this part, the limits are applicable to the telecommunication terminal products listed in the Key management catalogue for electronic information product pollution control, while the methods of measurement are applicable to telecommunication terminal products.
2 Normative references
The following documents contain provisions which, through reference in this part of GB/T 22727, constitute provisions of this part. For dated references, subsequent amendments (excluding corrections) to, or revisions, of any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest editions apply to this part.
GB 18871 Basic Standards for protection against ionizing radiation and for the safety of radiation sources
GB/Z 20288 General disassembly requirements for testing hazardous substances in electrical and electronic products
3 Terms and definitions
For the purposes of this part, the following terms and definitions apply.
3.1
telecommunication terminal products
the telecommunication equipment that is connected to the terminal of a public telecommunication network to provide users with functions of transmitting and receiving information, and the information technology equipment that is directly connected to the communication network
3.2
screening
a method for preliminarily quantifying the concentration of a to-be-measured element in the measured substance
3.3
special electronic materials
a mixture of two or three of metallic materials, organic materials and inorganic nonmetallic materials
Note: for example, circuit board materials, conductive adhesive and semiconductor functional materials.
3.4
inorganic nonmetallic materials
the materials consisting of oxides, carbides, nitrides and borides of certain elements as well as silicates, aluminates, phosphates and other substances a generic term for all materials other than organic polymer materials and metallic materials
Note: for example, glass, ceramics, etc.
3.5
matrix
a material or substance that contains or is attached with an analyte
Foreword i
Introduction ii
1 Scope
2 Normative references
3 Terms and definitions
4 Technical requirements for limits of certain hazardous substances in telecommunication product
4.1 Classification of component units of telecommunication terminal products
4.2 Requirements for limits of certain hazardous substances
4.3 Qualification judgment
5 Mechanical sample preparation method in the measurement process of hazardous substances in telecommunication product
6 Methods of measurement
6.1 General
6.2 Methods of measurement for screening of hazardous substances in the telecommunication terminal products by X-ray fluorescence spectrometer
6.3 Methods of measurement for polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE) in the telecommunication terminal products
6.4 Methods of measurement for lead (Pb), cadmium (Cd) and mercury (Hg) in telecommunication terminal products
6.5 Test method for hexavalent chromium in telecommunication terminal products
Bibliography
