1 Scope
1.1 This standard specifies standard reference conditions and methods of declaring the power, fuel consumption, lubricating oil consumption and test methods for internal combustion engines in commercial production using liquid or gaseous fuels. It applies to:
a) reciprocating internal combustion (RIC) engines (spark-ignition or compression-ignition engines) but excluding free piston engines;
b) rotary piston engines.
These engines may be naturally aspirated or pressure-charged either using a mechanical pressure-charger or turbocharger.
1.2 This standard applies to engines used for:
a) land, rail-traction and marine use as defined in GB/T 6072.1;
b) the propulsion of automotive vehicles as defined in ISO 1585 and ISO 2534;
c) motorcycles as defined in ISO 4106;
d) the propulsion of agricultural tractors and machines as defined in ISO 2288;
e) the propulsion of earth-moving machinery as defined in ISO 9249;
f) the propulsion of recreational craft or other small marine craft up to 24m hull length as defined in ISO 8665.
This standard may be applied to engines used to propel road construction machines, industrial trucks, and for other applications where no suitable standard for these engines exists.
1.3 Individual requirements for a particular engine application are given in the relevant “Satellite” standard. In order to completely specify the requirements relevant to a particular engine application this “Core” standard shall only be used in conjunction with the relevant “Satellite” standard.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 1883.1-2005 Reciprocating Internal Combustion Engines - Vocabulary - Part 1: Terms for Engine Design and Operation (ISO 2710-1:2000, IDT)
GB/T 6072.4-2000 Reciprocating Internal Combustion Engines - Performance - Part 4: Speed Governing (idt, ISO 3046-4:1997)
GB/T 6072.5-2003 Reciprocating Internal Combustion Engines - Performance - Part 5: Torsional Vibrations (ISO 3046-5:2001, IDT)
GB/T 6072.6-2000 Reciprocating internal combustion engines - Performance - Part 6: Overspeed Protection (idt, ISO 3046-6:1990)
GB/T 21405-2008 Reciprocating Internal Combustion Engines - Determination and Method for the Measurement of Engine Power - Additional Requirements for Exhaust Emission Tests in accordance with ISO 8178
ISO 1585:1992 Road Vehicles - Engine Test Code - Net Power
ISO 2288:1997 ) Agricultural Tractors and Machines - Engine Test Code - Net Power
ISO 2534:1998 Road Vehicles - Engine Test Code - Gross Power
ISO 3104:1994 Petroleum Products - Transparent and Opaque Liquids - Determination of Kinematic Viscosity and Calculation of Dynamic Viscosity
ISO 3675:1998 Crude Petroleum and Liquid Petroleum Products - Laboratory Determination of Density - Hydrometer Method
ISO 4106:1993 Motorcycles - Engine Test Code - Net Power
ISO 5163:1990 Motor and Aviation-type Fuels - Determination of Knock Characteristics - Motor Method
ISO 5164:1990 Motor Fuels - Determination of Knock Characteristics - Research Method
ISO 5165:1998 Petroleum Products - Determination of the Ignition Quality of Diesel Fuels - Cetane Engine Method
ISO 8665:1994 Small Craft - Marine Propulsion Engines and Systems - Power Measurements and Declarations
ISO 9249:1997 Earth-moving Machinery - Engine Test Code - Net Power
ISO 11614:1999 Reciprocating Internal Combustion Compression-ignition Engines - Apparatus for Measurement of the Opacity and for Determination of the Light Absorption Coefficient of Exhaust Gas
ASTM D 240-00 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
ASTM D 3338-00 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
Note: Some definitions are included from GB/T 1883.1, GB/T 6072.4 and ISO 7876-1.
3.1
auxiliaries and equipment
Foreword I
Introduction II
1 Scope
2 Normative References
3 Terms and Definitions
4 Symbols
5 Standard Reference Conditions
6 Tests
7 Method of Power Correction
8 Measurement and Correction of Smoke Value for Compression-ignition (Diesel) Engines
9 Test Report
Bibliography
