Atomic absorption spectrophotometer
1 Scope
This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation and storage of atomic absorption spectrophotometer.
This standard is applicable to atomic absorption spectrophotometer with flame atomization and electrothermal atomization functions (hereinafter referred to as “the instrument”).
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.
GB/T 191-2000 Packaging — Pictorial marking for handling of goods (eqv ISO 780:1977)
GB/T 2829-2002 Sampling Procedures and Tables for Periodic Inspection by Attributes (Applicable to Inspection of Stability for Productive Process)
GB/T 15464-1995 General-purpose specification for the packaging of instrumentation products
JB/T 9329-1999 Basic environmental conditions and testing methods for instruments transportation and storage in the transportation
JB/T 9355-1999 Preparation method of calibration solution for the measurement of atomic absorption
3 Requirements
3.1 Normal working conditions
The working environment of the instrument shall meet the following requirements:
a) Ambient temperature: 15°C ~ 30°C;
b) Relative humidity: ≤ 75%;
c) No vibration or electromagnetic interference affecting the use of instruments;
Foreword I
1 Scope
2 Normative references
3 Requirements
4 Test method
5 Inspection rules
6 Marking, packaging, transportation and storage
7 Quality Assurance
