This standard specifies the general principles and contents of handover and acceptance of project carried out by the supplier and the purchaser after site installation, commissioning and normal power generation of wind turbine generator system. It aims at providing unified method for the determination of safety, power characteristic, power quality, noise and other performance of the unit.
This standard is applicable to the finalized wind turbine generator system with swept area of wind rotor greater than or equal to 40m2, while not applicable to the acceptance of developed sample machine and newly developed product.
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Acceptance Procedure
4.1 General
4.2 Site Commissioning
4.3 Test Run
4.4 Pre-acceptance
4.5 Operation and Maintenance
4.6 Final Acceptance
5 Acceptance Test Method
5.1 General
5.2 Bolted Connection Inspection
5.3 Measurement of Grounding Resistance
5.4 Inspection and Test of Control Functions
5.5 Inspection and Test of Safety Protection Function
5.6 Anti-corrosion Inspection
5.7 Availability Assessment
5.8 Characteristic Testing of Unit Power
5.9 Measurement and Assessment of Power Quality
5.10 Noise Measurement
6 Acceptance Documents
6.1 General
6.2 Project Overview
6.3 Completion Drawing
6.4 Quality Documents of Wind Turbine Generator System
6.5 Acceptance Documents of Installation Construction Project
6.6 Commissioning and Test Run Reports of Wind Turbine Generator System
6.7 Acceptance Test Report
6.8 Conclusion and Suggestion of Final Acceptance
6.9 Others
