1 Scope
This Standard establishes a consistent and reproducible means of evaluating the load-carrying characteristics of tip-over protective structures (TOPS) under static loading, and prescribes performance requirements of a representative specimen under such loading.
This Standard applies to TOPS of compact excavators (as defined in GB/T 8498) with swing type boom, having an operating mass of 1 000 kg to 6 000 kg.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
Contents
Foreword I
1 Scope
2 Normative References
3 Definitions and Terms
4 Symbols
5 Test Method and Facilities
5.1 General
5.2 Instrumentation
5.3 Test facilities
5.4 TOPS/swing frame assembly and attachment to bedplate
6 Test Loading Procedures
6.1 General
6.2 Lateral loading
7 Material Temperature
8 Acceptance
9 Labelling of the TOPS
10 Reported Results
Appendix A (Normative) Test Report for TOPS Conforming to GB/T 19930-2005
Appendix B (Informative) Longitudinal Loading Test of TOPS
